Jump to year -> [1956] [1968] [1970] [1971] [1976] [1980] [1981] [1982] [1986] [1990] [1991] [1992] [1993] [1994] [1995] [1996] [1997] [1998] [2000] [2001] [2002] [2003] [2004] [2005] [2006] [2010]
[Phase]: Operation Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

705 files

    1956---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  1. The Pressurized Water Reactor as a Source of Heat for Steam Power Plants, by J.M. Kay and F.J. Hutchinson, IMechE, 01/01/1956. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 09000 Special Studies [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Conceptual Heat Transfer Thermodynamics [Phase] Concept Design Operation [Audience] Engineer Ugrad Vendor
    - Published in the Proceedings of the Institution of Mechanical Engineers Volume 170 1956 pps 281 - 296 20054600.pdf (2333 kb)
    2. 1968---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  2. The Performance of Zirconium Alloy Clad UO2 Fuel for Canadian Pressurized and Boiling Water Power Reactors, by R. D. Page and A. D. Lane, AECL, 01/05/1968. Doc type: Report.
    Summary: This paper presents the most recent information (as of 1968) on the performance of CANDU fuel, and goes on to summarize the results of an extensive irradiation program to develop fuels for boiling water cooled reactors.
    Keywords: [Concept] - [SI] 37000 Fuel [Discipline] Materials Engineering [Topic] Function Performance [Phase] Design Development Operation [Audience] Engineer
    - 19680101.pdf (2338 kb)
  3. Basic Course for Radiation Surveyors and Contamination Monitors of the Radiation and Industrial Safety Branch, by J.H. Fenn and W.R. Bush, AECL, 01/09/1968. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Health Physics [Topic] Radiation [Phase] Design Operation [Audience] Engineer Grad Technician Ugrad
    - 20100200.pdf (6970 kb)
    4. 1970---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  4. Nuclear Heated Steam Generators, by D. J. Stelliga and J.M. Dyke, Babcock & Wilcox Canada, 09/03/1970. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Presented to the Canadian Electrical Association, Toronto, Ontario, March 9-12, 1970 20053900.pdf (928 kb)
    5. 1971---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  5. Commissioning and Operating Experience with Canadian Nuclear Electric Stations, by L. W. Woodhead, D. C. Milley, K. E. Elston, E.P. Horton, A. Dahlinger and R.C. Johnston, AECL, 06/09/1971. Doc type: Report.
    Summary:  
    Keywords: [Concept] - [SI] 90000 Operations and Commissioning [Discipline] Nuclear Engineering [Topic] Performance [Phase] Commissioning Operation [Audience] Engineer Manager Technician
    - Paper No. A/Conf. 49/A/148 presented at the Fourth U.N. International Conference on the Peaceful Uses of Atomic Energy, Geneva, 6-16 September, 1971 19710101.pdf (965 kb)
    6. 1976---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  6. Turbine, Generator and Auxiliaries, Course 134, Nuclear Training Centre, OPG, 01/09/1976. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051100.pdf (3779 kb)
    - 134.00-00 Index and Objectives 20051101.pdf (355 kb)
    - 134.00-01 Turbine Theory 20051102.pdf (793 kb)
    - 134.00-02 Turbine Operational Performance 20051103.pdf (534 kb)
    - 134.00-03 Turbine Operational Problems 20051104.pdf (554 kb)
    - 134.00-04 Turbine Start-Up 20051105.pdf (365 kb)
    - 134.00-05 Factors Limiting Startup and Rates of Loading 20051106.pdf (561 kb)
    - 134.00-06 Reliability and Testing Requirements 20051107.pdf (253 kb)
    - 134.00-07 Maintenance 20051108.pdf (404 kb)
    7. 1980---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  7. Mathematics, Course 221, OPG, 01/04/1980. Doc type: Course.
    Summary: This course proves an introduction to two topics: equipment reliability evaluation, and calculus.
    Keywords: [Concept] Mathematics [SI] - [Discipline] Mathematics [Topic] Basic Equations Conceptual [Phase] Concept Operation [Audience] Engineer Manager
    - Full Course 20043000.pdf (3593 kb)
    - 221.00-1 Index and Objectives 20043001.pdf (124 kb)
    - 221.00-2 Indroduction 20043002.pdf (132 kb)
    - 421.10-4 Standard Notation 20043003.pdf (122 kb)
    - 421.20-1 Algebra Fundamentals 20043004.pdf (239 kb)
    - 421.40-1 Graphs 20043005.pdf (153 kb)
    - 421.40-2 Graphing Functions 20043006.pdf (80 kb)
    - 321.10-3 Logarithms and Exponentials 20043007.pdf (210 kb)
    - 321.10-4 Use of Logarithmic Scaled Graph Paper 20043008.pdf (347 kb)
    - 221.10-1 Basic Reliability Concepts 20043009.pdf (154 kb)
    - 221.20-1 The Straight Line 20043010.pdf (166 kb)
    - 221.20-2 The Derivative 20043011.pdf (259 kb)
    - 221.20-3 Simple Applications of Derivatives 20043012.pdf (127 kb)
    - 221.20-4 Differentiating Exponential Functions 20043013.pdf (193 kb)
    - 221.20-5 The Derivative in Science and Technology 20043014.pdf (213 kb)
    - 221.30-1 The Integral 20043015.pdf (194 kb)
    - 221.30-2 Application of the Integral as an Infinite Sum 20043016.pdf (371 kb)
    - 221.40-1 Appendix 1 : Review Exercises 20043017.pdf (202 kb)
    - 221.40-2 Appendix 2 : Questions Bearing Directly on Course 221 Content from Recent AECB Nuclear General Examinations 20043018.pdf (75 kb)
    - 221.40-3 Appendix 3 : Solving Quadratic Equations 20043019.pdf (84 kb)
    - 221.40-4 Answers to Assignments and Review Exercises 20043020.pdf (268 kb)
  8. Electrical Systems, Course 135, Nuclear Training Centre, OPG, 01/11/1980. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 50000 Electric Power Systems [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051300.pdf (1710 kb)
    - 135.00-00 Index and Objectives 20051301.pdf (279 kb)
    - 135.01-01 Introduction to Symmetrical Components and Unbalanced Current 20051302.pdf (185 kb)
    - 135.02-01 Unbalanced Currents: Their Effects 20051303.pdf (252 kb)
    - 135.03-01 Further Examples of Electrical Protective Relays 20051304.pdf (418 kb)
    - 135.04-01 Composite Electrical Protective Schemes: Part 1 20051305.pdf (344 kb)
    - 135.05-01 Composite Electrical Protective Schemes: Part 2 20051306.pdf (257 kb)
    9. 1981---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  9. Memories of my Life as a Professional Engineer in the Royal Navy and the Canadian Boiler Industry, by J.M. Dyke, Individual Contributions, 01/01/1981. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Fran Gregory, Ed 20054000.pdf (2139 kb)
    10. 1982---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  10. Electrical Equipment, Course 230.2, Nuclear Training Center, OPG, 01/01/1982. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 50000 Electric Power Systems [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 230.00 Introduction and Table of Contents 20050801.pdf (250 kb)
    - Module 230.21-1 Station Batteries and Battery Charges 20050802.pdf (348 kb)
    - Module 230.22-1 Switchgear - Busbars and Cables 20050803.pdf (188 kb)
    - Module 230.22-2 Switchgear - Motor Control Centres 20050804.pdf (217 kb)
    - Module 230.22-3 Switchgear - Air Circuit Breakers 20050805.pdf (203 kb)
    - Module 230.22-4 Switchgear - Vacuum Contactors 20050806.pdf (80 kb)
    - Module 230.22-5 Switchgear - Disconnect Switches, Ground Switches and G.T.D's 20050807.pdf (257 kb)
    - Module 230.22-6 Switchgear - Oil and Air Blast Breakers 20050808.pdf (266 kb)
    - Module 230.22-7 Switchgear - Circuit Breaker Control 20050809.pdf (241 kb)
    - Module 230.23-1 Transformers - Ratings 20050810.pdf (206 kb)
    - Module 230.23-2 Transformers - Operating Procedures 20050811.pdf (246 kb)
    - Module 230.24-1 Electrical Metering - Voltage and Circtuit Transformers 20050812.pdf (200 kb)
    - Module 230.24-2 Electrical Metering - Voltage Couplers and Meters 20050813.pdf (121 kb)
    - Module 230.25-1 Generators - Electrical and Magnetic Effects 20050814.pdf (139 kb)
    - Module 230.25-2 Generators - Equivalent Circuits 20050815.pdf (214 kb)
    - Module 230.25-3 Generators - Excitation Systems 20050816.pdf (204 kb)
    - Module 230.25-4 Generators - Paralleling and Synchronizing 20050817.pdf (176 kb)
    - Module 230.25-5 Generators - Infinite Bus Operation 20050818.pdf (129 kb)
    - Module 230.25-6 Generators - Non-Infinite Bus Operation 20050819.pdf (151 kb)
    - Module 230.25-7 Generators - Overfluxing 20050820.pdf (120 kb)
    - Module 230.25-8 Generators - Loading 20050821.pdf (272 kb)
    - Module 230.25-9 Generators - Operating Limitations 20050822.pdf (168 kb)
    - Module 230.25-10 Generators - Laboratory AC Generator Project 20050823.pdf (181 kb)
  11. Instrumentation and Control, Course 136, OPG, 01/02/1982. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Course Index and Objectives 20042300.pdf (64 kb)
    - 136.00-12 Control Equipment Review 20042301.pdf (229 kb)
    - 136.00-2 Control Theory Review 20042302.pdf (491 kb)
    - 136.00-3 Control Mode Settings 20042303.pdf (224 kb)
    - 136.00-4 Introduction to Frequency Response 20042304.pdf (628 kb)
    - 136.00-5 Direct Digital Control of Processes 20042305.pdf (249 kb)
  12. Chemistry, Course PI 24, OPG, 01/06/1982. Doc type: Course.
    Summary: Heavy water production, water composition and treatment, moderator water and cover gas chemistry, heat transport system aspects, heavy water leakage, environmental monitoring and control, chemical cleaning, chemical analysis.
    Keywords: [Concept] Chemistry and Corrosion [SI] 30000 Reactor, Steam Generators and Auxiliaries [Discipline] Chemistry [Topic] Corrosion Heavy Water Purification Radiation [Phase] Design Operation [Audience] College Engineer Ugrad
    - 24.00-0 Course Index and Checkout 20042700.pdf (62 kb)
    - 24.11-1 Isotopic Separation - General 20042701.pdf (58 kb)
    - 24.11-2 Isotopic Separation - Deuterium and Hydrogen 20042702.pdf (71 kb)
    - 24.11-3 Fractional Distillation 20042703.pdf (102 kb)
    - 24.12-0 Heavy Water Production - Enriching 20042704.pdf (24 kb)
    - 24.13-0 Heavy Water Production - Finishing Process 20042705.pdf (23 kb)
    - 24.21-2 Chemical Additives and Blowdown 20042706.pdf (166 kb)
    - 24.21-3 Make-Up Water Treatment Plant 20042707.pdf (227 kb)
    - 24.21-4 Secondary System Materials 20042708.pdf (21 kb)
    - 24.22-1 Moderator Cover Gas System - System Materials 20042709.pdf (22 kb)
    - 24.22-2 Moderator Water Chemistry 20042710.pdf (52 kb)
    - 24.22-3 Moderator Water - Purification 20042711.pdf (37 kb)
    - 24.22-4 Cover Gas - Purity 20042712.pdf (96 kb)
    - 24.23-1 Primary Heat Transport System - Materials 20042713.pdf (18 kb)
    - 24.23-2 Comissioning (chemical conditioning) of the Primary Heat Transport System 20042714.pdf (96 kb)
    - 24.23-3 Primary Heat Transport System Chemical and Impurity Control 20042715.pdf (154 kb)
    - 24.23-4 Transport of Radioactivity in Nuclear Reactors 20042716.pdf (265 kb)
    - 24.41-1 Heavy Water Leakage - Detection 20042717.pdf (92 kb)
    - 24.42-1Heavy Water Leakage - Recovery by Molecular Sieves 20042718.pdf (42 kb)
    - 24.30-1 Radioactive Materials - Management 20042719.pdf (321 kb)
    - 24.51-1 Environmental Monitoring - Radiological Emissions 20042720.pdf (182 kb)
    - 24.51-2 Environmental Monitoring - Radiological Emission Measurement 20042721.pdf (69 kb)
    - 24.52-1 Environmental Monitoring and Control - BHWP 20042722.pdf (36 kb)
    - 24.52-2 Environmental Monitoring and Control - General 20042723.pdf (40 kb)
    - 24.60-1 Chemical Cleaning of Fouled Equipment 20042724.pdf (132 kb)
    - 24.61-1 Chemical Cleaning - NGD experience 20042725.pdf (21 kb)
    - 24.61-1AI Decontamination of Douglas Pt. Reactor by CAN-DECON process 20042726.pdf (313 kb)
    - 24.61-1AII H.E. Fouling and Cleaning Experience in Ontario Hydro's Nuclear Generating Divisions 20042727.pdf (278 kb)
    - 24.61-1AIII Reference #3 20042728.pdf (349 kb)
    - 24.70-0 Chemical Analysis - General 20042729.pdf (190 kb)
    13. 1986---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  13. Safety and Licensing Philosophy and Experience at Ontario Hydro Nuclear Generating Stations, by W. Lee, OPG, 01/01/1986. Doc type: Paper.
    Summary: As published in the Canadian Nuclear Society Bulletin Vol. 7, No. 1, 1986 with the kind permission of the CNS: The safely and licensing philosophy adopted by Ontario Hydro in establishing the need for retrofit design modifications to CANDU nuclear generating stations in operation since the early 1970's is discussed. This philosophy was developed in response to regulatory requests to determine whether this need exists in view of the more extensive safely and licensing design features incorporated in recent CANDU nuclear generating stations compared to the earlier designs. These addition features generally reflect evolving safety knowledge and licensing requirements over time.
    Keywords: [Concept] Safety [SI] 03600 Nuclear Safety (Reactor) 10000 Site and Improvements [Discipline] Nuclear Engineering [Topic] Safety [Phase] Operation Safety [Audience] Engineer Grad Manager Technician Ugrad
    - 19860101.pdf (2661 kb)
    14. 1990---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  14. Mechanical Equipment, Course PI 30.1, Nuclear Training Centre, OPG, 01/01/1990. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20043200.pdf (5736 kb)
    - PI 30.10-0 Introduction and Objectives 20043201.pdf (392 kb)
    - 430.10-0 Identification and Coding of Mechanical Equipment 20043202.pdf (251 kb)
    - 430.10-1 Centrifugal Pumps 20043203.pdf (379 kb)
    - 330.10-1 Centrifugal Pumps 20043204.pdf (795 kb)
    - 430.10-2 Positive Displacement Pumps 20043205.pdf (168 kb)
    - 430.10-3 Compressonrs - Dynamic and Positive Displacement 20043206.pdf (270 kb)
    - 430.10-4 Air System 20043207.pdf (82 kb)
    - 430.10-5 Fans 20043208.pdf (57 kb)
    - 430.10-6 Vacuum Pumps 20043209.pdf (185 kb)
    - 230.11-1 Compressors 20043210.pdf (226 kb)
    - 330.11-1 Heat Exchangers 20043211.pdf (218 kb)
    - 430.12-1 Piping and Tubes 20043212.pdf (271 kb)
    - 430.13-1 Valves 20043213.pdf (513 kb)
    - 430.14-1 Lubrification 20043214.pdf (143 kb)
    - 430.14-2 Unit 1 Bearings 20043215.pdf (68 kb)
    - 430.14-2 Unit 2 Lubrification Methods 20043216.pdf (62 kb)
    - 430.14-2 Unit 3 Bearing Design and Installation 20043217.pdf (81 kb)
    - 230.12-1 Lubrification 20043218.pdf (250 kb)
    - 430.15-1 Sealing Devices 20043219.pdf (181 kb)
    - 330.14-1 Axial Mechanical Seals 20043220.pdf (190 kb)
    - 230.13-1 Shaft Couplings 20043221.pdf (204 kb)
    - 230.13-2 Belt Drives 20043222.pdf (247 kb)
    - 230.13-3 Chain Drives 20043223.pdf (115 kb)
    - 230.13-4 Gears and Gearing 20043224.pdf (250 kb)
    - 230.16-1 Gas Turbines 20043225.pdf (289 kb)
  15. Reliability for Management and Professional Staff , Course PI 21, Nuclear Training Centre, OPG, 01/01/1990. Doc type: Course.
    Summary: A six part introductory reliability course for management and professional staff.
    Keywords: [Concept] Mathematics [SI] - [Discipline] Mathematics [Topic] Basic Equations Conceptual [Phase] Concept Operation [Audience] Engineer Manager
    - Full Course 20043300.pdf (1585 kb)
    - Course Table of Contents 20043301.pdf (219 kb)
    - PI 21.00 Intro to the Course 20043302.pdf (104 kb)
    - PI 21.01 An Introduction to Reliability 20043303.pdf (166 kb)
    - PI 21.02 Reliability Concepts 20043304.pdf (384 kb)
    - PI 21.03 Process Systems 20043305.pdf (185 kb)
    - PI 21.04 Availability of Safety Systems 20043306.pdf (250 kb)
    - PI 21.05 Modern Reliability Techniques 20043307.pdf (208 kb)
    - PI 21.06 Reporting and Administration 20043308.pdf (111 kb)
  16. Electrical Equipment, Course PI 30.2, Nuclear Training Center, OPG, 01/01/1990. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 50000 Electric Power Systems [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20050700.pdf (4615 kb)
    - Table of Contents 20050701.pdf (234 kb)
    - PI 26.34-1 Impedance 20050702.pdf (159 kb)
    - PI 26.35-1 Three Phase Systems 20050703.pdf (282 kb)
    - PI 26.35-2 Power and Power Factor 20050704.pdf (190 kb)
    - PI 30.20-1 The CANDU Generating Station 20050705.pdf (150 kb)
    - PI 30.21-1 Conductors 20050706.pdf (379 kb)
    - PI 30.21-2 Insulation 20050707.pdf (221 kb)
    - PI 30.21-3 Fuses 20050708.pdf (323 kb)
    - PI 30.21-4 Disconnect Switches and Circuit Breakers 20050709.pdf (506 kb)
    - PI 30.22-1 Transformers 20050710.pdf (360 kb)
    - PI 30.23-1 AC Generators 20050711.pdf (357 kb)
    - PI 30.23-2 Generator Auxiliary Systems 20050712.pdf (404 kb)
    - PI 30.24-1 Motors 20050713.pdf (327 kb)
    - PI 30.24 Appendix A 20050714.pdf (77 kb)
    - PI 30.25-1 Motor Control 20050715.pdf (361 kb)
    - PI 30.26-1 Batteries 20050716.pdf (361 kb)
  17. Turbine and Auxiliaries, Course PI 34 / TIMS Ref. PI 3004, Nuclear Training Centre, OPG, 01/01/1990. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051000.pdf (11938 kb)
    - PI 34.00-00 Index and Objectives 20051001.pdf (619 kb)
    - 334.00-01 The Steam Turbine 20051002.pdf (676 kb)
    - 234.00-01 Turbine Construction 20051003.pdf (1037 kb)
    - 334.00-03 The Steam System 20051004.pdf (517 kb)
    - 234.00-02 Steam Control to the Turbine 20051005.pdf (514 kb)
    - 334.00-07 The Condenser 20051006.pdf (476 kb)
    - PI 25-06 The Mollier Diagram and the Turbine Processes 20051007.pdf (1214 kb)
    - 334.00-08 Feedwater Heating System -1 20051008.pdf (212 kb)
    - 334.00-09 Feedwater Heating System -2 20051009.pdf (307 kb)
    - 234.00-07 Feedwater Control and Operation 20051010.pdf (586 kb)
    - PI 24.21-01 Secondary Heat Transport System - Impurities 20051011.pdf (230 kb)
    - PI 24.21-02 Chemical Additives and Blowdown 20051012.pdf (274 kb)
    - PI 25-07 Efficiency of the CANDU Turbine Cycle 20051013.pdf (513 kb)
    - 234.00-03 Steam Valve Hydraulic Control 20051014.pdf (255 kb)
    - 234.00-04 Governor Operation 20051015.pdf (516 kb)
    - 234.00-05 Turbine Governors 20051016.pdf (677 kb)
    - 334.00-10 The Lubricating Oil System 20051017.pdf (275 kb)
    - 334.00-11 The Turning Gear 20051018.pdf (113 kb)
    - 234.00-06 Turbine Operational Problems 20051019.pdf (568 kb)
    - 234.00-08 Factors Limiting Startup and Rates of Loading 20051020.pdf (887 kb)
    - 334.00-13 appendix 1 Ontario Hydro Nuclear Turbine Types 20051021.pdf (245 kb)
    18. 1991---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  18. Chernobyl – A Canadian Perspective, by V.G. Snell and J.Q. Howieson, AECL, 01/08/1991. Doc type: Report.
    Summary: This brochure looks at the Canadian CANDU (CANada Deuterium Uranium) reactor to see how it stacks up in its ability to tolerate the sorts of mistakes that were made at Chernobyl.
    Keywords: [Concept] - [SI] 31000 Reactor [Discipline] Nuclear Engineering [Topic] Safety [Phase] Concept Design Operation Safety [Audience] Engineer Manager Vendor
    - 19910101.pdf (398 kb)
    19. 1992---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  19. Intro to Ontario Hydro and the Nuclear Operations Branch, Course 410, OPG, 01/02/1992. Doc type: Course.
    Summary: An overview of the histroy of Ontario Hydro, its corporate direction and structure with a focus on teh Nuclear Operations Branch.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] Technician
    - Module 1 - Introduction to Ontario Hydro's Organization, Objectives and Performance 20042501.pdf (237 kb)
    - Module 2 - Employee Safety in Nuclear Operations Branch 20042502.pdf (84 kb)
    - Module 3 - Radiation and the Public 20042503.pdf (173 kb)
  20. Electrical Systems, Course 235, OPG, 01/07/1992. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 50000 Electric Power Systems [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 235.00 Introduction 20042900.pdf (114 kb)
    - Module 235.01 Unit Service Power 20042901.pdf (305 kb)
    - Module 235.02 Ring Bus Configuration 20042902.pdf (103 kb)
    - Module 235.03 Electrical Protection Schemes 20042903.pdf (87 kb)
    - Module 235.04 Application of Electrical Protection Schemes in the Power Station 20042904.pdf (189 kb)
    - Module 235.05 Electric Motor Protection 20042905.pdf (420 kb)
    - Module 235.06 Power Transformer Protection 20042906.pdf (253 kb)
    - Module 235.07 Generator Protection 20042907.pdf (374 kb)
    - Module 235.08 Generator and Transmission Line Stability 20042908.pdf (682 kb)
    - Appendix A Power Transfer Equation 20042909.pdf (48 kb)
  21. Chemistry, Nuclear Training Course 224, OPG, 01/10/1992. Doc type: Course.
    Summary: Reviews the chemical technology fundamentals and addresses the chemistry-realated concerns of the condensate, feedwater and boiler system, the moderator system, the heat trnsport system, the liquid zone control system and the irradiated fuel bay.
    Keywords: [Concept] Chemistry and Corrosion [SI] 30000 Reactor, Steam Generators and Auxiliaries [Discipline] Chemistry [Topic] Corrosion Heavy Water Purification Radiation [Phase] Design Operation [Audience] College Engineer Ugrad
    - Cover page, Table of contents, Introduction 20040800.pdf (382 kb)
    - A Review of 424 20040801.pdf (753 kb)
    - The Condensate, Feedwater and Boiler System 20040802.pdf (967 kb)
    - The Moderator and Auxiliary Systems 20040803.pdf (1005 kb)
    - The Heat Transport and Auxiliary Systems 20040804.pdf (511 kb)
    - Auxiliary Systems: Liquid Zone Control, Irradiated Fuel Bay 20040805.pdf (447 kb)
    22. 1993---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  22. Fundamentals of Power Reactors, CNSC, 01/01/1993. Doc type: Course.
    Summary: Fundamentals of power reactors covering basic nuclear processes, basic thermodynamics, thermalhydraulics, materials, nuclear systems and radiation protection.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology [Discipline] General Engineering [Topic] Intro and Overview [Phase] Concept Operation [Audience] College Engineer Ugrad
    - Science & Engineering Fundamentals - Part 1 19930201.pdf (5929 kb)
    - Science & Engineering Fundamentals - Part 2 19930202.pdf (7656 kb)
    - Nuclear Reactor System - Part 1 19930203.pdf (6312 kb)
    - Nuclear Reactor System - Part 2 19930204.pdf (8311 kb)
    - Nuclear Reactor System - Part 3 19930205.pdf (3791 kb)
    - Nuclear Reactor System - Part 4 19930206.pdf (4327 kb)
    - Radiation Protection 19930207.pdf (5465 kb)
  23. A Short History of the CANDU Nuclear Power System, by Gordon L. Brooks, AECL, 01/02/1993. Doc type: Paper.
    Summary: This paper provides a short historical summary of the evolution of the CANDU nuclear power system with emphasis on the roles played by Ontario Hydro and private sector companies in Ontario in collaboration with Atomic Energy of Canada Limited (AECL).
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology [Discipline] General Engineering [Topic] Intro and Overview [Phase] Concept Design Operation [Audience] College Engineer Manager Ugrad
    - 19930101.pdf (214 kb)
  24. Introduction to CANDU Processes, Course 41001, OPG, 01/04/1993. Doc type: Course.
    Summary: Brief history of CANDU, operating philosophy, nuclear systems, energy balance and overall unit control, support systems, waste management, heavy water production and management.
    Keywords: [Concept] - [SI] 01000 General Engineering (Methods, Policy, Procedures) [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] Technician
    - Module 0 - Index, Introduction and Course Information 20042600.pdf (253 kb)
    - Module 1 Operating Philosophy - Introduction 20042601.pdf (33 kb)
    - Module 1 A. Employee and Public Safety 20042602.pdf (171 kb)
    - Module 1 B. Reactor Safety 20042603.pdf (271 kb)
    - Module 1 C. Environmental Limits 20042604.pdf (64 kb)
    - Module 1 D. Economics of CANDU 20042605.pdf (94 kb)
    - Module 1 E. How We Conduct Our Business 20042606.pdf (266 kb)
    - Module 2 Reactor Side of the Station - Introduction 20042607.pdf (16 kb)
    - Module 2 A. Principle of Reactor Operation 20042608.pdf (217 kb)
    - Module 2 B. Major Components of CANDU Reactors 20042609.pdf (360 kb)
    - Module 2 C. Heat Production and Reactor Regulation 20042610.pdf (160 kb)
    - Module 2 D. Reactor, Personnel and Public Protection 20042611.pdf (276 kb)
    - Module 3 The Conventional Side of the Power Station- Introduction 20042612.pdf (28 kb)
    - Module 3 A. Steam and Feedwater Cycle 20042613.pdf (403 kb)
    - Module 3 B. The Generator 20042614.pdf (73 kb)
    - Module 3 C. Conventional and Radiological Hazards 20042615.pdf (54 kb)
    - Module 4 Energy Balance and Unit Control - Introduction 20042616.pdf (14 kb)
    - Module 4 A. Efficiency and Energy Conversion 20042617.pdf (76 kb)
    - Module 4 B. Energy Balance 20042618.pdf (166 kb)
    - Module 4 C. Unit Operational Control 20042619.pdf (71 kb)
    - Module 5 Support Systems - Introduction 20042620.pdf (18 kb)
    - Module 5 A. Electrical Systems 20042621.pdf (124 kb)
    - Module 5 B. Water and Air Systems 20042622.pdf (113 kb)
    - Module 5 C. Identification System 20042623.pdf (64 kb)
    - Module 5 D. Site Support Systems 20042624.pdf (61 kb)
    - Module 5 E. Waste Management 20042625.pdf (77 kb)
    - Module 5 F. Heavy Water Production and Management 20042626.pdf (184 kb)
  25. Materials, Nuclear Training Course 228, OPG, 01/06/1993. Doc type: Course.
    Summary: General material properties and the approach to material selection for CANDU reactors. Failure modes of materials, both mechanical and radiation induced. Pressure tube problems.
    Keywords: [Concept] Materials [SI] 31000 Reactor [Discipline] Materials Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Material Properties and Selection: Cover page, Table of contents, Introduction 20040900.pdf (140 kb)
    - Material Properties and Selection: Basic Material Properties and How They Can Be Altered 20040901.pdf (553 kb)
    - Material Properties and Selection: Common Mechanical-Based Failure Modes 20040902.pdf (870 kb)
    - Material Properties and Selection: Selection and Specification of Materials for Nuclear Applications 20040903.pdf (514 kb)
    - Effect of Radiation on Materials: Radiation Damage to Materials 20040904.pdf (547 kb)
    - Effect of Radiation on Materials: Problems with Pressure Tubes 20040905.pdf (612 kb)
    26. 1994---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  26. Turbine and Auxiliaries, Nuclear Training Course 234, OPG, 01/07/1994. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 234-00 Introduction to the Course 20042400.pdf (182 kb)
    - Module 234-01 The Steam Turbine 20042401.pdf (760 kb)
    - Module 234-02 The Boiler 20042402.pdf (851 kb)
    - Module 234-03 The Main Steam System 20042403.pdf (1399 kb)
    - Module 234-04 Auxiliary Steam Systems 20042404.pdf (684 kb)
    - Module 234-05 The Condenser and its Auxiliary Systems 20042405.pdf (1091 kb)
    - Module 234-06 The Condensate, the Boiler Feed and Their Auxiliary Systems 20042406.pdf (1736 kb)
    - Module 234-07 The Turbine Governing System 20042407.pdf (724 kb)
    - Module 234-08 The Turbine Supervisory System 20042408.pdf (273 kb)
    - Module 234-09 The Turning Gear 20042409.pdf (305 kb)
    - Module 234-10 The Turbine Lubricating System 20042410.pdf (503 kb)
    - Module 234-11 Startup and Loading 20042411.pdf (1220 kb)
    - Module 234-12 Unloading and Shutdown 20042412.pdf (333 kb)
    - Module 234-13 Special Modes of Operation and Accidents 20042413.pdf (895 kb)
    - Module 234-14 Turbine Operational Problems 20042414.pdf (850 kb)
  27. Mechanical Equipment, Course 23001, OPG, 01/09/1994. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20042800.pdf (1261 kb)
    - Intro and Table of Contents 20042801.pdf (44 kb)
    - Module 1 Centrifugal Pumps and Systems 20042802.pdf (1034 kb)
    - Module 2 Positive Displacement Compressor Operation 20042803.pdf (194 kb)
    28. 1995---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  28. Synergistic Nuclear Fuel Cycles of the Future, by D.A. Meneley, A.R. Dastur, P.J. Fehrenbach and K.H. Talbot, AECL, 11/09/1995. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 37000 Fuel [Discipline] Nuclear Engineering [Topic] Fuel Management [Phase] Concept Design Operation [Audience] Engineer Manager
    - Global 1995, International Conference on Evaluation of Emerging Nuclear Fuel Cycle Systems, Versailles, France 20054701.pdf (504 kb)
    - Global 1995, International Conference on Evaluation of Emerging Nuclear Fuel Cycle Systems, Versailles, France 20054702.pdf (443 kb)
    29. 1996---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  29. Nuclear Power Plant Control & Simulaion, Course 3.4, by G. Bereznai, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Workbook, Chapter 1 - Modules A & B 20044401.pdf (644 kb)
    - Workbook, Chapter 2 - Modules A to F 20044402.pdf (3512 kb)
    - Workbook, Chapter 3 - Modules A to I 20044403.pdf (4141 kb)
    - Workbook, Chapter 4 - Modules A to D 20044404.pdf (2750 kb)
    - Workbook, Chapter 5 - Modules A to C 20044405.pdf (1554 kb)
  30. Operation & Maintenance of a Nuclear Power Plant, Course 4.4, by D. McQuade, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 90000 Operations and Commissioning [Discipline] Nuclear Engineering [Topic] Maintainability [Phase] Operation [Audience] Engineer Manager Technician
    - Title, Objectives, Text Index 20051801.pdf (374 kb)
    - Workbook 01 - Management of a Nuclear Power Plant 20051802.pdf (591 kb)
    - Workbook 02 - Principles of Operation & Maintenance 20051803.pdf (1187 kb)
    - Workbook 03 - Configuration Management 20051804.pdf (620 kb)
    - Workbook 04 - Maintenance of an NPP 20051805.pdf (1093 kb)
    - Workbook 05 - Outage Management 20051806.pdf (1108 kb)
    - Workbook 06 - Specialist Requirements in Maintenance 20051807.pdf (348 kb)
    - Workbook 07 - Operator and Maintenance Standards 20051808.pdf (1048 kb)
    - Workbook 08 - System Surveillance 20051809.pdf (795 kb)
    - Workbook 09 - Building the Total Team 20051810.pdf (771 kb)
  31. Natural Analogs for Nuclear Fuel Disposal, Course 5.2, by J. Cramer, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 00 - Introduction to Natural Analogs 20052101.pdf (102 kb)
    - Workbook 01 - Copper Corrosion 20052102.pdf (396 kb)
    - Workbook 02 - Clay Sealing 20052103.pdf (249 kb)
    - Workbook 03 - Clay Sealing 2 20052104.pdf (268 kb)
    - Workbook 04 - Clay Sealing - Avonlea Bentonite 20052105.pdf (230 kb)
    - Workbook 05 - Concrete Stability 20052106.pdf (99 kb)
    - Workbook 06 - Concrete & Ground Water 20052107.pdf (48 kb)
    - Workbook 07 - Radionuclide Migration in Soils 20052108.pdf (228 kb)
    - Workbook 08 - Natural Nuclear Reactor 20052109.pdf (479 kb)
    - Workbook 09 - Disposal System Analog 20052110.pdf (1381 kb)
    - Workbook 10 - Summary 20052111.pdf (50 kb)
  32. Hydrogeology of Nuclear Fuel Disposal, Course 5.4, by D. Stevenson, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 01 - Hydrogeology 20052301.pdf (1408 kb)
    - Workbook 02 - Structural Geology & Borehole Studies 20052302.pdf (1036 kb)
    - Workbook 03 - Groundwater Sampling 20052303.pdf (1231 kb)
    - Workbook 04 - Candidate Site Characterization 20052304.pdf (734 kb)
  33. Environmental Issues in Nuclear Fuel Disposal, Course 5.5, by S. Sheppard, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 01 - Environmental Issues in Waste Management 20052401.pdf (2604 kb)
    - Workbook 02 - Lakes and Rivers 20052402.pdf (1445 kb)
    - Workbook 03 - Atmosphere 20052403.pdf (815 kb)
    - Workbook 04 - Natural Realm 20052404.pdf (906 kb)
    - Workbook 05 - Sensitivity Analysis 20052405.pdf (1734 kb)
    - Workbook 06 - Monte Carlo Models 20052406.pdf (1234 kb)
  34. Nuclear Fuel Disposal Performance Assessment, Course 5.6, by J. Cramer, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 00 - Performance Assessment Modeling 20052501.pdf (65 kb)
    - Workbook 01 - Introduction & System Variability Analysis 20052502.pdf (2055 kb)
    - Workbook 02 - I/O and Systems Model Interfaces 20052503.pdf (1567 kb)
    - Workbook 03 - Complex & Large System Models 20052504.pdf (412 kb)
    - Workbook 04 - Sensitivity Analysis & SYVAC3 Applications 20052505.pdf (592 kb)
    - Workbook 05 - Canadian System Model & SYVAC3-CC3 20052506.pdf (880 kb)
  35. Radiation Processing, Course 6.1, by A. Sigh and H. Singh, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 01 - Basics, Current & Emerging Applications 20052701.pdf (360 kb)
    - Workbook 02 - Potential Concerns Associated with Irradiated Foods 20052702.pdf (598 kb)
    - Workbook 03 - Irradiated Foods (cont'd) 20052703.pdf (392 kb)
    - Workbook 04 - Sterilization of Medical Products 20052704.pdf (494 kb)
    - Workbook 05 - Dosimetry 20052705.pdf (223 kb)
    - Workbook 06 - Radiation Polymerization - Coatins & Links 20052706.pdf (111 kb)
    - Workbook 07 - Radiation Polymerization - Grafting 20052707.pdf (110 kb)
    - Workbook 08 - Radiation Polymerization - Bioengineering 20052708.pdf (188 kb)
    - Workbook 09 - Polymerization - Material Composites 20052709.pdf (93 kb)
    - Workbook 10 - Radiation Protection 20052710.pdf (100 kb)
    - Workbook 11 - Dose Rate Effect in Food Irradiation 20052711.pdf (1661 kb)
    - Workbook 12 - Radiation Processing - Basic Aspects 20052712.pdf (691 kb)
    - Workbook 13 - Industrial Irradiators 20052713.pdf (628 kb)
    - Workbook 14 - The Environment 20052714.pdf (66 kb)
    - Workbook 15 - Chemical Wastes - PCBs 20052715.pdf (62 kb)
    - Workbook 16 - Radiation Processing of Sewage 20052716.pdf (194 kb)
    - Workbook 17 - Radiation Processing of Flue Gases 20052717.pdf (91 kb)
    - Workbook 18 - Electron Processing in the Pulping Industry 20052718.pdf (360 kb)
    - Workbook 19 - Chemical Effects 20052719.pdf (274 kb)
    - Workbook 20 - Manufacturing of Chemicals 20052720.pdf (50 kb)
    - Workbook 21 - Food Irradiation - Dose Rate Effect 20052721.pdf (301 kb)
    - Workbook 22 - Electron Processing - Composites 20052722.pdf (887 kb)
    - Workbook 23 - Dosimetry Procedures in Electron Processing 20052723.pdf (248 kb)
    - Workbook 24 - Safety in Industrial Accelerator Facility 20052724.pdf (467 kb)
    - Workbook 25 - Effects on Polymeric Systems - Polymerization 20052725.pdf (68 kb)
    - Workbook 26 - Effects on Polymeric Systems - Crosslinking and Scission 20052726.pdf (232 kb)
    - Workbook 27 - Effects on Polymeric Systems - Polyethylene Crosslinking 20052727.pdf (91 kb)
    - Workbook 28 - Effects on Polymeric Systems - Elastomers 20052728.pdf (138 kb)
    - Workbook 29 - Spices, Herbs, Other Vegetable Seasonings 20052729.pdf (236 kb)
    - Workbook 30 - Successful Applications in Food Irradiation 20052730.pdf (316 kb)
    - Workbook 31 - Irradiation of Fresh Fruits 20052731.pdf (273 kb)
    - Workbook 32 - Radiation Processing of Advanced Composites 20052732.pdf (670 kb)
    - Workbook 33 - Micronutrients 20052733.pdf (210 kb)
    - Workbook 34 - Irradiation of Red Meats 20052734.pdf (157 kb)
  36. Corrosion for Engineers, Course 7.3, by D. Lister, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Corrosion cost and measurement, eight forms of corrosion.
    Keywords: [Concept] Chemistry and Corrosion [SI] 31000 Reactor [Discipline] Chemistry [Topic] Corrosion [Phase] Concept Operation [Audience] College Engineer Ugrad
    - Workbook 01 - Cost of Corrosion 20053201.pdf (294 kb)
    - Workbook 02 - Corrosion Measurement 20053202.pdf (312 kb)
    - Workbook 03 - Eight Forms of Corrosion 20053203.pdf (249 kb)
    - Workbook 04 - Galvanic Corrosion 20053204.pdf (751 kb)
    - Workbook 05 - Crevice Corrosion 20053205.pdf (587 kb)
    - Workbook 06 - Pittings 20053206.pdf (280 kb)
    - Workbook 07 - Intergranular Corrosion 20053207.pdf (465 kb)
    - Workbook 08 - Selective Leaching 20053208.pdf (462 kb)
    - Workbook 09 - Stress Corrosion 20053209.pdf (497 kb)
    - Workbook 10 - Erosion Corrosion 20053210.pdf (332 kb)
    - Workbook 11 - Hydrogen Effects (pdf 136 kb, 6 pages) 20053211.pdf (125 kb)
    - Workbook 12 - Acoustic Corrosion Thermodynamics 20053212.pdf (538 kb)
    - Workbook 13 - Corrosion Current 20053213.pdf (611 kb)
  37. Digital Instrumentation & Control, Course 7.4, by M. MacBeth, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Chapter 01 - CANDU DCC Features 20053301.pdf (237 kb)
    - Chapter 02 - Digital Control Concepts 20053302.pdf (317 kb)
    - Chapter 03 - Computer I/O Subsystems 20053303.pdf (423 kb)
    - Chapter 04 - Digital Ctrl Program Concepts 20053304.pdf (492 kb)
    - Chapter 05 - PHT P&IC Control Program 20053305.pdf (906 kb)
    - Chapter 06 - Steam Generator Level Control 20053306.pdf (727 kb)
    - Chapter 07 - Computerized Shutdown System 20053307.pdf (250 kb)
    - Chapter 08 - S/W Categorization Methods 20053308.pdf (233 kb)
    - Chapter 09 - General Display Requirements 20053309.pdf (349 kb)
    - Chapter 10 - Human Interface Design (HFE) 20053310.pdf (1014 kb)
    - Chapter 11 - HFE Methods 20053311.pdf (365 kb)
    - Chapter 12 - Work Assignment 20053312.pdf (173 kb)
    - Chapter 13 - Typical Design Guide Features 20053313.pdf (376 kb)
    - Chapter 14 - Typical HFE Eng. Program 20053314.pdf (421 kb)
    - Workbook 01 Module 01 - Introduction to Instrumentation 20053315.pdf (182 kb)
    - Workbook 01 Module 02 - ISA Symbols 20053316.pdf (94 kb)
    - Workbook 01 Module 03 - Pressure Instrumentation 20053317.pdf (122 kb)
    - Workbook 01 Module 04 - Level Instrumentation 20053318.pdf (249 kb)
    - Workbook 01 Module 05 - Flow Instrumentation 20053319.pdf (267 kb)
    - Workbook 01 Module 06 - Temperature Instrumentation 20053320.pdf (235 kb)
    - Workbook 01 Module 07 - Digital Computer Control 20053321.pdf (237 kb)
    - Workbook 01 Module 08 - Control Valves, Accessories 20053322.pdf (931 kb)
    - Workbook 02 Module 01 - Control Concepts 20053323.pdf (588 kb)
    - Workbook 02 Module 02 - Control Equipment 20053324.pdf (414 kb)
    - Workbook 02 Module 03 - Control and Process Considerations 20053325.pdf (371 kb)
    - Workbook 03 Module 01 - Level Control 20053326.pdf (566 kb)
    - Workbook 03 Module 02 - Pressure Control 20053327.pdf (203 kb)
    - Workbook 04 Module 01 - Log and Linear Ranges 20053328.pdf (96 kb)
    - Workbook 04 Module 02 - Log range detectors 20053329.pdf (126 kb)
    - Workbook 04 Module 03 - Linear Range Detectors 20053330.pdf (119 kb)
    - Workbook 05 Module 01 - Zone Level Control 20053331.pdf (216 kb)
    - Workbook 05 Module 02 - Reactor Regulating System 20053332.pdf (228 kb)
    - Workbook 05 Module 03 - Reactor Shutdown Systems 20053333.pdf (625 kb)
    - Workbook 05 Module 04 - Recovery from a Poison Outage 20053334.pdf (79 kb)
    - Workbook 06 Module 01 - Feed and Bleed Pressure Control 20053335.pdf (206 kb)
    - Workbook 06 Module 02 - Pressure Control by Pressurizer 20053336.pdf (111 kb)
    - Workbook 06 Module 03 - Heat Transport Bleed Control 20053337.pdf (245 kb)
    - Workbook 07 Module 01 - Unit Control Concepts 20053338.pdf (173 kb)
    - Workbook 07 Module 02 - Boiler Pressure Control 20053339.pdf (255 kb)
    - Workbook 07 Module 03 - Unit Startup 20053340.pdf (380 kb)
    - Workbook 08 Module 01 - Controller Tuning 20053341.pdf (189 kb)
    - Workbook 09 Module 01 - CANDU 9 Plant Control 20053342.pdf (182 kb)
  38. Welding Technology, Course 7.5, by I. Grant, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Appreciation of metal joining techniques: wleding, welding processes, weldment quality, symbols on drawings, nondestructive examination, and codes and standards.
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Chapter 01 - Introduction 20053401.pdf (1359 kb)
    - Chapter 02 - Specification – Covered Carbon Steel Electrodes 20053402.pdf (2022 kb)
    - Chapter 03 - Submerged Arc Welding 20053403.pdf (1118 kb)
    - Chapter 04 - Gas Metal Arc Welding 20053404.pdf (949 kb)
    - Chapter 05 - Plasma Welding 20053405.pdf (119 kb)
    - Chapter 06 - Electrical Power Sources 20053406.pdf (551 kb)
    - Chapter 07 - Welding Stainless Steel Tubing 20053407.pdf (473 kb)
    - Chapter 08 - Thermal Efficiency of Arc Welding Processes 20053408.pdf (737 kb)
    - Chapter 09 - Solidification Structures & Properties of Fusion Welds 20053409.pdf (3163 kb)
    - Chapter 10 - Prediction of Welding Distortion 20053410.pdf (618 kb)
    - Chapter 11 - Material & Fabrication Considerations for CANDU Heat Transport Systems 20053411.pdf (1808 kb)
    - Chapter 13 - Fitness for Purpose 20053413.pdf (858 kb)
    - Chapter 14 - Welding Variables Procedure Specs 20053414.pdf (965 kb)
    - Chapter 17 - Calculating Force/Unit Length on Welds 20053417.pdf (773 kb)
    - Chapter 18 - Design for Welding 20053418.pdf (569 kb)
    - Chapter 19 - Design and Construction Methods for Welded Steel Merchant Vessels 20053419.pdf (313 kb)
    - Workbook 01 - Welding Technologyes) 20053420.pdf (240 kb)
    - Workbook 02 - Flux Shielded Welding Processes 20053421.pdf (549 kb)
    - Workbook 03 - Submerged Arc Welding 20053422.pdf (636 kb)
    - Workbook 04 - Gas Metal Arc Welding 20053423.pdf (497 kb)
    - Workbook 05 - Plasma Arc Welding 20053424.pdf (169 kb)
    - Workbook 06 - Welding Power Supplies & Controls 20053425.pdf (262 kb)
    - Workbook 07 - Arc Physics and Weld Pool Behaviour 20053426.pdf (281 kb)
    - Workbook 08 - Heat Flow in Welding 20053427.pdf (262 kb)
    - Workbook 09 - Metallurgical Effects of the Weld Thermal Cycle 20053428.pdf (1172 kb)
    - Workbook 10 - Distortion, Residual Stress & Post-Weld Heat Treatment 20053429.pdf (361 kb)
    - Workbook 11 - Weldability of Structural Steels 20053430.pdf (535 kb)
    - Workbook 12 - Weld Discontinuities 20053431.pdf (923 kb)
    - Workbook 13 - Inspection & Testing 20053432.pdf (327 kb)
    - Workbook 14 - Welding Qualification & Certification 20053433.pdf (480 kb)
    - Workbook 15 - Design for Welding 20053434.pdf (605 kb)
    - Workbook 16 - Weld Symbols on Drawings 20053435.pdf (531 kb)
    - Workbook 17 Static Strength of Welded Joints 20053436.pdf (443 kb)
    - Workbook 18 - Fatigue Failure of Welded Joints 20053437.pdf (557 kb)
    - Workbook 19 - Fracture of Welded Structures 20053438.pdf (539 kb)
  39. Project Advocacy and Public Education, Course 7.6, by W. Keyes, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Understanding the public mood, measuring awareness, project support, government and industry response, public education, Thai case study.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Layout [Phase] Operation [Audience] Manager
    - Chapter 01 - Acceptance for New Projects 20053500.pdf (318 kb)
  40. Managing for Results, Course 7.7, by L. Courchesne, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Covers leadership, team effectiveness, communication, planning for results, the workplace, conflict resolution, process management, performance, due diligence and diversity.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] Manager
    - Chapter 01 - Leadership 20053601.pdf (329 kb)
    - Chapter 02 - Team Effectiveness 20053602.pdf (347 kb)
    - Chapter 03 - Communication 20053603.pdf (1131 kb)
    - Chapter 04 - Planning for Results 20053604.pdf (562 kb)
    - Chapter 05 - The Changing Workplace 20053605.pdf (705 kb)
    - Chapter 06 - Resolving Conflict 20053606.pdf (469 kb)
    - Chapter 07 - Process Management 20053607.pdf (306 kb)
    - Chapter 08 - Managing Performance 20053608.pdf (272 kb)
    - Chapter 09 - Due Diligence 20053609.pdf (221 kb)
    - Chapter 10 - Diversity 20053610.pdf (264 kb)
    - Chapter 11 - Strategic Planning 20053611.pdf (27 kb)
    - Workbook 01 - Leadership 20053612.pdf (391 kb)
    - Workbook 02 - Team Effectiveness 20053613.pdf (324 kb)
    - Workbook 03 - Communication 20053614.pdf (354 kb)
    - Workbook 04 - Planning for Results 20053615.pdf (278 kb)
    - Workbook 05 - The Changing Workplace 20053616.pdf (439 kb)
    - Workbook 06 - Conflict Resolution 20053617.pdf (126 kb)
    - Workbook 07 - Process Management 20053618.pdf (462 kb)
    - Workbook 08 - Managing Performance 20053619.pdf (308 kb)
    - Workbook 09 - Due Diligence 20053620.pdf (305 kb)
    - Workbook 10 - Managing Diversity 20053621.pdf (349 kb)
    - Workbook 11 - Strategic Planning 20053622.pdf (840 kb)
  41. Reactor Control & Simulation, Course 3.3, by J. Koclas, Chulalongkorn University, 01/08/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Chapter 0 - Title and Table of Contents 20044301.pdf (67 kb)
    - Chapter 1 - Point Kinetics 20044302.pdf (490 kb)
    - Chapter 2 - General Concepts 20044303.pdf (262 kb)
    - Chapter 3 - Power Measurement & Calibration 20044304.pdf (211 kb)
    - Chapter 4 - Power Error 20044305.pdf (193 kb)
    - Chapter 5 - Liquid Zone Control 20044306.pdf (134 kb)
    - Chapter 6 - Adjuster Rod Control 20044307.pdf (109 kb)
    - Chapter 7 - MCA Control 20044308.pdf (90 kb)
    - Chapter 8 - Shutoff Rods Extraction 20044309.pdf (35 kb)
    - Chapter 9 - Modal Flux Synthesis 20044310.pdf (83 kb)
    - Chapter 10 - Reactor Setback Program 20044311.pdf (66 kb)
    - Chapter 11 - Reactor Stepback 20044312.pdf (62 kb)
    - Chapter 12 - Shutdown Systems: SDS1 and SDS2 20044313.pdf (173 kb)
    - Chapter XX - Supplementary Materials 20044314.pdf (531 kb)
    - Workbook, Chapter 2 - General Concepts 20044315.pdf (331 kb)
    - Workbook, Chapter 3 - Power Measurement & Calibration 20044316.pdf (263 kb)
    - Workbook, Chapter 4 - Power Error 20044317.pdf (254 kb)
    - Workbook, Chapter 5 - Liquid Zone Control 20044318.pdf (159 kb)
    - Workbook, Chapter 6 - Adjuster Rod Control 20044319.pdf (125 kb)
    - Workbook, Chapter 7 - Mechanical Control Absorbers 20044320.pdf (94 kb)
    - Workbook, Chapter 8 - Shutoff Rods Extraction 20044321.pdf (46 kb)
    - Workbook, Chapter 9 - Modal Flux Synthesis 20044322.pdf (103 kb)
    - Workbook, Chapter 10 - Reactor Setback Program 20044323.pdf (85 kb)
    - Workbook, Chapter 11 - Reactor Stepback 20044324.pdf (80 kb)
    - Workbook, Chapter 12 - Shutdown Systems: SDS1 and SDS2 20044325.pdf (209 kb)
  42. CANDU Overiew, Course 3.2, by G. Bereznai, Chulalongkorn University, 01/11/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 30000 Reactor, Steam Generators and Auxiliaries [Discipline] Nuclear Engineering [Topic] Conceptual Function Intro and Overview Process Systems Transient [Phase] Operation [Audience] College Engineer Ugrad
    - Chapter 0 - Title, Table of Contents, Objectives 20044201.pdf (89 kb)
    - Chapter 1 - Overall Unit 20044202.pdf (973 kb)
    - Chapter 2 - Reactor and Moderator 20044203.pdf (659 kb)
    - Chapter 3 - Reactor Control 20044204.pdf (881 kb)
    - Chapter 4 - Heat Transport 20044205.pdf (755 kb)
    - Chapter 5 - Steam, Turbine and Feedwater 20044206.pdf (666 kb)
    - Chapter 6 - Special Safety Systems 20044207.pdf (1131 kb)
    - Workbook, Chapter 0 - Table of Contents, Course Introduction 20044208.pdf (194 kb)
    - Workbook, Chapter 1 - Modules A to E 20044209.pdf (3559 kb)
    - Workbook, Chapter 2 - Modules A to C 20044210.pdf (688 kb)
    - Workbook, Chapter 3 - Modules A to C 20044211.pdf (2317 kb)
    - Workbook, Chapter 4 - Modules A to D 20044212.pdf (1115 kb)
    - Workbook, Chapter 5 - Modules A & B 20044213.pdf (1110 kb)
    - Workbook, Chapter 6 - Modules A to D 20044214.pdf (464 kb)
  43. Quality Management, Course 7.1, by G. Wieckowski, Chulalongkorn University, 01/11/1996. Doc type: Course.
    Summary: Historical and cultural background of quality concepts, scientific basis of the growth of Quality Management in the 20th century.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] Manager
    - Chapter 01- Introduction to Quality Management 20053001.pdf (165 kb)
    - Chapter 02 - Establishing Quality Management 20053002.pdf (260 kb)
    - Chapter 03 - The Tools of Quality 20053003.pdf (340 kb)
    - Chapter 04 - Quality in Project Management 20053004.pdf (303 kb)
    - Chapter 05 - Quality in Design 20053005.pdf (318 kb)
    - Chapter 06 - Quality in Procurement 20053006.pdf (275 kb)
    - Chapter 07 - Quality in Construction 20053007.pdf (300 kb)
    - Chapter 08 - Quality in Operations 20053008.pdf (280 kb)
    - Chapter 09 - Human Factors in Design, Operations, & Maintenance 20053009.pdf (349 kb)
    - Chapter 10 - The Assessment Function 20053010.pdf (272 kb)
    - Workbook 01 - Introduction 20053011.pdf (165 kb)
    - Workbook 02 - Establishing QM 20053012.pdf (215 kb)
    - Workbook 03 - Tools 20053013.pdf (237 kb)
    - Workbook 04 - Q in Project Management 20053014.pdf (165 kb)
    - Workbook 05 - Q in Design 20053015.pdf (210 kb)
    - Workbook 06 - Q in Procurement 20053016.pdf (258 kb)
    - Workbook 07 - Q in Construction 20053017.pdf (173 kb)
    - Workbook 08 - Q in Operations 20053018.pdf (211 kb)
    - Workbook 09 - Human Factors 20053019.pdf (193 kb)
    - Workbook 10 - Assessment 20053020.pdf (198 kb)
  44. Non-Destructive Testing, Course 7.2, by E. Hussein, Chulalongkorn University, 05/12/1996. Doc type: Course.
    Summary: Nondestructive testing including ultrasonics, magnetic flux leakage, eddy current, radiography, acoustic emission, and microwaves.
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Chapter 00 - Table of Contents 20053101.pdf (162 kb)
    - Chapter 01 - Introduction 20053102.pdf (220 kb)
    - Chapter 02 - Ultrasonics 20053103.pdf (670 kb)
    - Chapter 03 - Magnetic Flux Leakage 20053104.pdf (301 kb)
    - Chapter 04 - Eddy Current (pdf 340 kb, 20 pages) 20053105.pdf (369 kb)
    - Chapter 05 - Radiography 20053106.pdf (409 kb)
    - Chapter 06 - Acoustic Emission 20053107.pdf (305 kb)
    - Chapter 07 - Microwaves 20053108.pdf (145 kb)
    45. 1997---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  45. Radioactive Waste Management, Course 5.1, by L. Zikovsky, Chulalongkorn University, 01/01/1997. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Chapter 00 - Table of Contents 20052001.pdf (312 kb)
    - Chapter 01 - Introduction 20052002.pdf (1537 kb)
    - Chapter 02 - Gaseous Waste 20052003.pdf (1137 kb)
    - Chapter 03 - Liquid and Wet Waste 20052004.pdf (2459 kb)
    - Chapter 04 - Solid Medium & Low Level 20052005.pdf (2018 kb)
    - Chapter 05 - Transport 20052006.pdf (542 kb)
    - Chapter 06 - Solid High Level Waste 20052007.pdf (846 kb)
    - Chapter 07 - Disposal of High Level Waste 20052008.pdf (3282 kb)
    - Chapter 08 - Management of Radioactive Waste in Canada 20052009.pdf (2503 kb)
    - Workbook 01 - Radioactive Waste Management 20052010.pdf (374 kb)
    - Workbook 02 - Gaseous Radwaste 20052011.pdf (378 kb)
    - Workbook 03 - Liquid Radwaste 20052012.pdf (642 kb)
    - Workbook 04 - Solid LLW 20052013.pdf (720 kb)
    - Workbook 05 - Transport 20052014.pdf (193 kb)
    - Workbook 06 - Solid HLW 20052015.pdf (350 kb)
    - Workbook 07 - Disposal Principles 20052016.pdf (1066 kb)
    - Workbook 08 - Canada's Radwaste 20052017.pdf (1015 kb)
  46. Engineered Barriers for Fuel Disposal, Course 5.3, by L.H. Johnson, Chulalongkorn University, 18/03/1997. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Nuclear Engineering [Topic] Waste Handling [Phase] Concept Design Operation Safety [Audience] Engineer Manager
    - Workbook 01 - Introduction 20052201.pdf (1579 kb)
    - Workbook 02 - Detailed Chemistry Considerations 20052202.pdf (700 kb)
    - Workbook 03 - Container Failure Predictions 20052203.pdf (924 kb)
    - Workbook 04 - Container Design Considerations 20052204.pdf (829 kb)
    - Workbook 05 - Seal Materials, Design, & Performance 20052205.pdf (757 kb)
    - Workbook 06 - Large Scale In Situ Testing 20052206.pdf (1582 kb)
    - Workbook 07 - Vault Model 20052207.pdf (322 kb)
  47. Steam Generators for CANDU, Engineering Memoirs, by J.M. Dyke, Individual Contributions, 01/06/1997. Doc type: Essay.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20054100.pdf (19 kb)
  48. Nuclear Weapons and Nuclear Reactors, by Dan Meneley, OPG, 01/08/1997. Doc type: Report.
    Summary: This report addresses the tenuous link between nuclear power reactor development and the proliferation of nuclear weapons, particularly with respect to possible terrorist exploitation. Arguments are presented which contradict the popular image of nuclear weaponry as a "basement project".
    Keywords: [Concept] - [SI] 03600 Nuclear Safety (Reactor) [Discipline] Nuclear Engineering [Topic] Conceptual Waste Handling [Phase] Operation [Audience] Engineer Manager Vendor
    - Nuclear Studies & Safety Department, Ontario Hydro, Report No. 77157 20032001.pdf (101 kb)
  49. Peer Evaluation Techniques, Course 4.5, by R.B. Taylor, Chulalongkorn University, 01/11/1997. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 90000 Operations and Commissioning [Discipline] Nuclear Engineering [Topic] Performance [Phase] Operation [Audience] Engineer Manager Technician
    - Section 01 - Self-Assessment 20051901.pdf (410 kb)
    - Section 02 - Operational Safety Review 20051902.pdf (394 kb)
    - Section 03 - Control of Plant Operations 20051903.pdf (432 kb)
    - Section 04 - Operations 20051904.pdf (474 kb)
    - Section 05 - Maintenance 20051905.pdf (631 kb)
    - Section 06 - Housekeeping, Material Conditions, Industrial Safety 20051906.pdf (246 kb)
    - Section 07 - Configuration Management 20051907.pdf (218 kb)
    - Workbook 01 - Self-Assessment 20051908.pdf (286 kb)
    - Workbook 02 - IAEA-OSART 20051909.pdf (468 kb)
    - Workbook 03 - Control of Plant Activities 20051910.pdf (228 kb)
    - Workbook 04 - Operations 20051911.pdf (459 kb)
    - Workbook 05 - Maintenance 20051912.pdf (515 kb)
    - Workbook 06 - Housekeeping, Material Conditions, Industrial Safety 20051913.pdf (324 kb)
    - Workbook 07 - Configuration Management 20051914.pdf (309 kb)
    50. 1998---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  50. IAEA CANDU Instrumentation & Control Course, by Mike MacBeth, IAEA, 18/09/1998. Doc type: Course.
    Summary: IAEA CANDU Instrumentation & Control Course, by Dr. Mike MacBeth (AECL), September 13 - 18, 1998, SNERDI, Shanghai
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Instrumentation Equipment 20041601.pdf (2847 kb)
    - Electronic Control 20041602.pdf (1680 kb)
    - Controller Tuning 20041603.pdf (510 kb)
    - Computer Input/Output Subsystems 20041604.pdf (484 kb)
    - Control Programs 20041605.pdf (810 kb)
    - Nuclear Instrumentation 20041606.pdf (518 kb)
    - Reactor Control and Protection 20041607.pdf (627 kb)
    - Heat Transport Control Systems 20041608.pdf (1415 kb)
    - Reactor Protection 20041609.pdf (712 kb)
    - Overall Unit Control 20041610.pdf (693 kb)
    51. 2000---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  51. Radiation Monitoring Notebook, by James T. Voss, Individual Contributions, 01/06/2000. Doc type: Reference.
    Summary: LA-UR-00-2584 James T. (Tom) Voss, NRRPT, CHP June 2000 (Feb. 2001 Update)
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Health Physics [Topic] Radiation [Phase] Design Operation [Audience] Engineer Grad Technician Ugrad
    - 20041901.pdf (191 kb)
  52. Safety Analysis Technology: Evolution, Revolution and the Drive to Re-Establish Margins, by John C Luxat, OPG, 13/09/2000. Doc type: Presentation.
    Summary: A historical perspective of the evolution of safety analysis technology at OPG is presented below. The key elements of the new safety analysis methodology are then described together with its relationship to other components of Canadian nuclear safety technology. This development is placed in context with similar work being conducted in the international Light Water Reactor (LWR) community.
    Keywords: [Concept] - [SI] 31000 Reactor [Discipline] Nuclear Engineering [Topic] Performance [Phase] Commissioning Design Operation Safety [Audience] Engineer Technician
    - 20000301.pdf (256 kb)
  53. A Reactor Cannot Explode Like a Nuclear Bomb, by Dan Meneley, Individual Contributions, 01/11/2000. Doc type: Lecture.
    Summary:
    Keywords: [Concept] - [SI] 03600 Nuclear Safety (Reactor) [Discipline] Nuclear Engineering [Topic] Conceptual Performance [Phase] Concept Design Operation Safety [Audience] College Engineer Manager Technician Vendor
    - 20000201.pdf (237 kb)
  54. The CANDU System: A Canadian Achievement, by Adam McLean, University of Toronto, 15/11/2000. Doc type: Presentation.
    Summary: A presentation on CANDU, its history and its achievements.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] College
    - 20000401.pdf (31 kb)
    55. 2001---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  55. CANDU Poster, AECL, 01/01/2001. Doc type: Presentation.
    Summary: Handy overview poster showing the major components and concepts of CANDU.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] High
    - 20010501.pdf (945 kb)
  56. CANDU - How a Reactor Works, AECL, 02/01/2001. Doc type: Presentation.
    Summary: A handy overview poster showing how a CANDU reactor works.
    Keywords: [Concept] Overview [SI] 03000 Engineering Science and Technology [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] High
    - 20010601.pdf (578 kb)
  57. Why a Chernobyl-type accident cannot happen in CANDU reactors, AECL, 03/01/2001. Doc type: Presentation.
    Summary:
    Keywords: [Concept] - [SI] 31000 Reactor [Discipline] Nuclear Engineering [Topic] Safety [Phase] Concept Design Operation Safety [Audience] Engineer Manager Vendor
    - 20010701.pdf (1026 kb)
  58. A Human Turning Point – Nuclear Energy, by Dan Meneley, Individual Contributions, 06/03/2001. Doc type: Lecture.
    Summary:
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] General Engineering [Topic] Intro and Overview [Phase] Operation [Audience] College
    - 20010101.pdf (543 kb)
  59. Fuel for the Next Millennia, by Dan Meneley, AECL, 06/03/2001. Doc type: Presentation.
    Summary:
    Keywords: [Concept] - [SI] 37000 Fuel [Discipline] Nuclear Engineering [Topic] Fuel Management [Phase] Concept Design Operation [Audience] Engineer Manager
    - 20010201.pdf (906 kb)
  60. Radiation Protection ("Green Book"), by Jan Burnham, NB Power, 01/06/2001. Doc type: Book.
    Summary:
    Keywords: [Concept] - [SI] 03400 Radiation Protection (including Waste Management) [Discipline] Health Physics [Topic] Radiation [Phase] Design Operation [Audience] Engineer Grad Technician Ugrad
    - Cover Page 20031300.pdf (98 kb)
    - Chapter 1 - Atomic Structure 20031301.pdf (898 kb)
    - Chapter 2 - Radiation Theory 20031302.pdf (1729 kb)
    - Chapter 3 - Radiation Dose 20031303.pdf (2016 kb)
    - Chapter 4 - Biological Effects Of Radiation 20031304.pdf (1341 kb)
    - Chapter 5 - Dose Limits And Risk 20031305.pdf (1929 kb)
    - Chapter 6 - Instruments 20031306.pdf (8721 kb)
    - Chapter 7 - Protection From External Exposures 20031307.pdf (3122 kb)
    - Chapter 8 - Internal Dose 20031308.pdf (1414 kb)
    - Chapter 9 - Contamination Control 20031309.pdf (9704 kb)
    - Chapter 10 - Dose Records 20031310.pdf (1925 kb)
    - Chapter 11 - Waste Management 20031311.pdf (4460 kb)
    - Chapter 12 - Work Planning 20031312.pdf (2171 kb)
    - Chapter 13 - Emergency Planning 20031313.pdf (2632 kb)
    - Answers to Problems 20031314.pdf (1093 kb)
    - Index 20031315.pdf (1210 kb)
  61. Starting Up a CANDU Reactor, by Dan Meneley, AECL, 20/07/2001. Doc type: Paper.
    Summary: CANDU power reactor designers and operators are fully aware of the need for caution in starting up power reactors. However, the open literature describing these established methods is quite sparse, especially with regard to the unique advantages in operability and safety that arise from the computer-driven Reactor Regulating System (RRS). The following text provides a general outline of one procedure appropriate for start-up of a CANDU 6 reactor.
    Keywords: [Concept] - [SI] 90000 Operations and Commissioning [Discipline] Nuclear Engineering [Topic] Reactor Physics [Phase] Operation [Audience] College Engineer Manager Technician Ugrad
    - Abbreviated Step-by Step Procedure 20010401.pdf (94 kb)
    62. 2002---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  62. Mechanical Equipment Course, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030200.pdf (86 kb)
    - 20030201.pdf (1463 kb)
    - Vibrations 20030202.pdf (1123 kb)
    - Valves 20030203.pdf (2952 kb)
    - Flowsheets 20030204.pdf (1693 kb)
  63. Materials Course, CNSC, 01/01/2002. Doc type: Course.
    Summary: This course covers the following areas pertaining to Mechanical Properties: Mechanical and Thermal Stress, Corrosion, Pressure Tubes and Fuel Bundles
    Keywords: [Concept] Materials [SI] - [Discipline] Materials Engineering [Topic] Corrosion Radiation [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030300.pdf (86 kb)
    - 20030301.pdf (844 kb)
    - Materials & Chemistry 20030302.pdf (687 kb)
    - Corrosion 20030303.pdf (1280 kb)
    - Radiation Effects on Materials 20030304.pdf (1093 kb)
  64. Basic Instrumentation and Control Course, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Electrical, Instrumentation & Control [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Conceptual Function [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030400.pdf (87 kb)
    - 20030401.pdf (850 kb)
    - Pressure Measurement 20030402.pdf (350 kb)
    - Flow Measurement 20030403.pdf (391 kb)
    - Level Measurement 20030404.pdf (162 kb)
    - Temperature Measurement 20030405.pdf (209 kb)
    - Neutron Flux Measurement 20030406.pdf (282 kb)
    - Control 20030407.pdf (539 kb)
    - I&C Diagrams 20030408.pdf (98 kb)
  65. Electrical Course, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Electrical, Instrumentation & Control [SI] 50000 Electric Power Systems [Discipline] Electrical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030800.pdf (83 kb)
    - Course 20030801.pdf (2299 kb)
    - Electrical Module - Presentation 20030802.pdf (1468 kb)
    - Transformers Module - Presentation 20030803.pdf (664 kb)
    - Generators Module - Presentation 20030804.pdf (2615 kb)
    - Electrical Protection Module - Presentation 20030805.pdf (2756 kb)
    - Électricité 20070200.pdf (1659 kb)
  66. Principes de Science et de Fonctionnement des Réacteurs - Instrumentation Fondamentale, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Electrical, Instrumentation & Control [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Conceptual Function [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Instrumentation Fondamentale 20070400.pdf (869 kb)
  67. Testing the Dynamics of Shutdown Systems, by Oszvald Glockler, OPG, 01/05/2002. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 31000 Reactor [Discipline] Electrical Engineering [Topic] Performance [Phase] Commissioning Operation [Audience] Engineer Technician
    - Instrumentation in Reactor Trip Measurements 20030501.pdf (153 kb)
  68. Reactor Noise Measurements in the Safety and Regulating Systems of CANDU Stations, by Oszvald Glockler, OPG, 01/05/2002. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 31000 Reactor [Discipline] Electrical Engineering [Topic] Performance [Phase] Commissioning Operation [Audience] Engineer Technician
    - 20030601.pdf (242 kb)
    69. 2003---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  69. Principes de Science et de Fonctionnement des Réacteurs - Les Matériaux, CNSC, 01/01/2003. Doc type: Course.
    Summary:
    Keywords: [Concept] Materials [SI] - [Discipline] Materials Engineering [Topic] Corrosion Radiation [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Les Matériaux 20070600.pdf (420 kb)
  70. Principes de Science et de Fonctionnement des Réacteurs - Équipement Mécanique, CNSC, 01/01/2003. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Équipement Mécanique 20070700.pdf (954 kb)
  71. What is RTD, RdF Corporation, 01/02/2003. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - 20030701.pdf (198 kb)
  72. Fretting in Nuclear Steam Generators - A New Approach, by J.M. Dyke, Individual Contributions, 20/04/2003. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 11th International Conference on Nuclear Engineering, Tokyo, Japan 20054500.pdf (2821 kb)
  73. CANDU Fundamentals, CNSC, 24/06/2003. Doc type: Course.
    Summary: Fundamentals of reactor processes of the CANDU reactor.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology [Discipline] Nuclear Engineering [Topic] Conceptual Function Intro and Overview Process Systems Transient [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Complete Course 20040700.pdf (6375 kb)
    - Objectives 20040701.pdf (422 kb)
    - Atomic Structure 20040702.pdf (257 kb)
    - Radioactivity - Spontaneous Nuclear Processes 20040703.pdf (372 kb)
    - Nuclear Stability And Instability 20040704.pdf (264 kb)
    - Activity and Half-Life 20040705.pdf (271 kb)
    - Neutrons and Neutron Interactions 20040706.pdf (296 kb)
    - Fission 20040707.pdf (488 kb)
    - Fuel, Moderator, and Reactor Management 20040708.pdf (231 kb)
    - Nuclear Safety 20040709.pdf (182 kb)
    - Nuclear Power Reactors 20040710.pdf (205 kb)
    - Candu Reactor Construction 20040711.pdf (653 kb)
    - Moderator and Moderator System 20040712.pdf (196 kb)
    - Moderator Auxiliary Systems 20040713.pdf (253 kb)
    - Heat Transport System (HTS) 20040714.pdf (410 kb)
    - Heat Transport Auxiliary Systems 20040715.pdf (372 kb)
    - Reactor Fuel 20040716.pdf (503 kb)
    - Neutron Life Cycle 20040717.pdf (221 kb)
    - Criticality and Neutron Multiplication 20040718.pdf (297 kb)
    - Changes In Reactor Power With Time 20040719.pdf (236 kb)
    - Xenon: A Fission Product Poison 20040720.pdf (287 kb)
    - Reactivity Effects of Temperature Changes 20040721.pdf (268 kb)
    - Neutron Flux Control 20040722.pdf (311 kb)
    - Reactivity Mechanisms 20040723.pdf (538 kb)
    - Emergency Coolant Injection & Containment 20040724.pdf (795 kb)
    - The Conventional Side of the Station 20040725.pdf (1049 kb)
    - Other Major Systems 20040726.pdf (665 kb)
    - Radioactivity - Spontaneous Nuclear Processes 20040727.pdf (539 kb)
    - Nuclear Stability And Instability 20040728.pdf (1360 kb)
    - Activity and Half-Life 20040729.pdf (120 kb)
    - Neutrons and Neutron Interactions 20040730.pdf (163 kb)
    - Fission 20040731.pdf (3750 kb)
    - Fuel, Moderator, and Reactor Management 20040732.pdf (937 kb)
    - Nuclear Safety 20040733.pdf (465 kb)
    - Nuclear Power Reactors 20040734.pdf (693 kb)
    - CANDU Reactor Construction 20040735.pdf (1259 kb)
    - Moderator System 20040736.pdf (731 kb)
    - Heat Transport System 20040737.pdf (1053 kb)
    - Fuel and Fuelling 20040738.pdf (2226 kb)
    - Neutron Life Cycle 20040739.pdf (151 kb)
    - Criticality and Neutron Multiplication 20040740.pdf (709 kb)
    - Changes in Reactor Power with time 20040741.pdf (2744 kb)
    - Neutron Flux Control 20040742.pdf (157 kb)
    - Reactivity Mechanisms 20040743.pdf (1894 kb)
    - Emergency Coolant Injection & Containment 20040744.pdf (1024 kb)
    - The Conventional Side of the Station 20040745.pdf (1535 kb)
    - Other Major Systems 20040746.pdf (2581 kb)
  74. Principes Fondamentaux des Réacteurs CANDU - CANDU Fundamentals, CNSC, 24/06/2003. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology [Discipline] Nuclear Engineering [Topic] Conceptual Function Intro and Overview Process Systems Transient [Phase] Operation [Audience] College Engineer Ugrad
    - Texte Complet 20060300.pdf (7093 kb)
    - Table des Matières 20060301.pdf (102 kb)
    - Chapitre 1 - Objectifs 20060302.pdf (105 kb)
    - Chapitre 2 - Structure de l’Atome 20060303.pdf (156 kb)
    - Chapitre 3 - Radioactivité - Phénomènes Nucléaires Spontanés 20060304.pdf (296 kb)
    - Chapitre 4 - Stabilité et Instabilité Nucléaires 20060305.pdf (198 kb)
    - Chapitre 5 - Activité et Période 20060306.pdf (177 kb)
    - Chapitre 6 - Les Neutrons et Leurs Interactions 20060307.pdf (206 kb)
    - Chapitre 7 - La Fission 20060308.pdf (382 kb)
    - Chapitre 8 - Combustible, Modérateur et Gestion du Réacteur 20060309.pdf (156 kb)
    - Chapitre 9 - Sûreté Nucléaire 20060310.pdf (141 kb)
    - Chapitre 10 - Réacteurs de Puissance 20060311.pdf (157 kb)
    - Chapitre 11 - Structure d’un Réacteur 20060312.pdf (820 kb)
    - Chapitre 12 - Modérateur et Circuit du Modérateur 20060313.pdf (125 kb)
    - Chapitre 13 - Circuits Auxiliaires du Modérateur 20060314.pdf (250 kb)
    - Chapitre 14 - Circuit Caloporteur (CC) 20060315.pdf (356 kb)
    - Chapitre 15 - Systèmes Auxiliaires du Circuit Caloporteur 20060316.pdf (321 kb)
    - Chapitre 16 - Le Combustible CANDU 20060317.pdf (575 kb)
    - Chapitre 17 - Cycle de Vie des Neutrons 20060318.pdf (126 kb)
    - Chapitre 18 - Criticité et Multiplication de Neutrons 20060319.pdf (189 kb)
    - Chapitre 19 - Changements dans la Puissance du Réacteur au Fil du Temps 20060320.pdf (149 kb)
    - Chapitre 20 - Un Produit de Fission Agissant Comme Poison : le Xénon 20060321.pdf (211 kb)
    - Chapitre 21 - Effets des Changements de Température sur la Réactivité 20060322.pdf (197 kb)
    - Chapitre 22 - Contrôle du Flux de Neutron 20060323.pdf (267 kb)
    - Chapitre 23 - Mécanismes de Contrôle de la Réactivité 20060324.pdf (461 kb)
    - Chapitre 24 - Injection d’Urgence de Caloporteur et Confinement 20060325.pdf (969 kb)
    - Chapitre 25 - Les Parties Non Nucléaires de la Centrale 20060326.pdf (1176 kb)
    - Chapitre 26 - Autres Grands Systèmes 20060327.pdf (752 kb)
    75. 2004---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  75. The Role of Two-Phase Coolant in Moderating Fretting in Nuclear Steam Generators, by J.M. Dyke, Individual Contributions, 20/04/2004. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 12th International Conference on Nuclear Engineering, Washington, DC 20054201.pdf (1714 kb)
    - 12th International Conference on Nuclear Engineering, Washington, DC 20054202.pdf (1558 kb)
    76. 2005---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  76. Nuclear Power Plant Systems and Operation, by G. Bereznai, University of Ontario Institute of Technology, 01/07/2005. Doc type: Reference.
    Summary: Nuclear Power Plant Systems and Operation course covering following: science fundamentals, equipment and systems principles relevant to CANDU reactors; CANDU reactor power plant systems and their operation.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 30000 Reactor, Steam Generators and Auxiliaries [Discipline] Nuclear Engineering [Topic] Conceptual Function Intro and Overview Process Systems Transient [Phase] Operation [Audience] College Engineer Ugrad
    - 20071000.pdf (2511 kb)
    77. 2006---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  77. Fretting Failures in Early Canadian Nuclear Steam Generators, by J.M. Dyke and W.J. Garland, CANTEACH, 01/03/2006. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060201.pdf (140 kb)
  78. Evolution of CANDU Steam Generators – A Historical View, by J.M. Dyke and W.J. Garland, CANTEACH, 01/04/2006. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060101.pdf (702 kb)
    79. 2010---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  79. Why Ontario Generates So Much Electricity from Nuclear Energy, by Lorne G. McConnell, CNA, 01/03/2010. Doc type: Paper.
    Summary: This historical review provides an excellent summary of the context in which CANDU was conceived, designed, built, commissioned and operated. The origins of some of the major characteristic features of CANDU are also given. Note: Figure G3 herein is a corrected version of the original published version which contained a scale error.
    Keywords: [Concept] - [SI] 00000 General Project [Discipline] History [Topic] Intro and Overview [Phase] Commissioning Concept Construction Design Operation [Audience] College
    - 20100500.pdf (5844 kb)
---end of page---