Jump to year -> [1956] [1970] [1976] [1977] [1978] [1981] [1984] [1988] [1990] [1993] [1994] [1996] [1997] [1998] [2002] [2003] [2004] [2006]
[Discipline]: Mechanical Engineering Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

254 files

    1956---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  1. The Pressurized Water Reactor as a Source of Heat for Steam Power Plants, by J.M. Kay and F.J. Hutchinson, IMechE, 01/01/1956. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 09000 Special Studies [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Conceptual Heat Transfer Thermodynamics [Phase] Concept Design Operation [Audience] Engineer Ugrad Vendor
    - Published in the Proceedings of the Institution of Mechanical Engineers Volume 170 1956 pps 281 - 296 20054600.pdf (2333 kb)
    2. 1970---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  2. Nuclear Heated Steam Generators, by D. J. Stelliga and J.M. Dyke, Babcock & Wilcox Canada, 09/03/1970. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Presented to the Canadian Electrical Association, Toronto, Ontario, March 9-12, 1970 20053900.pdf (928 kb)
    3. 1976---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  3. Canadian Power Reactor Fuel, by R.D. Page, AECL, 01/03/1976. Doc type: Report.
    Summary:
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 37000 Fuel [Discipline] Materials Engineering Mechanical Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Design Description [Audience] College Engineer Technician Ugrad
    - AECL 5609, updated version of Lecture 14 of the 1974 Nuclear Power Symposium Series, doc#19720114 19760101.pdf (8580 kb)
  4. Turbine, Generator and Auxiliaries, Course 134, Nuclear Training Centre, OPG, 01/09/1976. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051100.pdf (3779 kb)
    - 134.00-00 Index and Objectives 20051101.pdf (355 kb)
    - 134.00-01 Turbine Theory 20051102.pdf (793 kb)
    - 134.00-02 Turbine Operational Performance 20051103.pdf (534 kb)
    - 134.00-03 Turbine Operational Problems 20051104.pdf (554 kb)
    - 134.00-04 Turbine Start-Up 20051105.pdf (365 kb)
    - 134.00-05 Factors Limiting Startup and Rates of Loading 20051106.pdf (561 kb)
    - 134.00-06 Reliability and Testing Requirements 20051107.pdf (253 kb)
    - 134.00-07 Maintenance 20051108.pdf (404 kb)
    5. 1977---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  5. Fluid Mechanics, Nuclear Training Course 223, January 1977, OPG, 01/01/1977. Doc type: Course.
    Summary: Basic fluid mechanics concepts (viscosity, friction, water hammer, pipe flow, lubrication).
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Course Objectives 20040300.pdf (82 kb)
    - Force - Momentum 20040306.pdf (90 kb)
    - Water Hammer 20040307.pdf (226 kb)
    6. 1978---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  6. Fluid Mechanics, Nuclear Training Course 123, April 1978, OPG, 01/04/1978. Doc type: Course.
    Summary: Basic fluid mechanics concepts (viscosity, friction, water hammer, pipe flow, lubrication).  Note: Doc# 20040201 through to 20040205 are identical to OPG 223.00-1, rev January 1977 (see Doc# 20040301 through to 20040305
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Course Objectives 20040200.pdf (87 kb)
    - Parallel Pipe Flow 20040206.pdf (202 kb)
    - Compressible Flow 20040207.pdf (285 kb)
    - Water Hammer 20040208.pdf (265 kb)
    - Hydrodynamic Film Lubrication 20040209.pdf (562 kb)
  7. Fluid Mechanics, Nuclear Training Course 223, January 1977, OPG, 01/04/1978. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Viscosity 20040301.pdf (147 kb)
    - Reynolds' Number 20040302.pdf (105 kb)
    - Friction in Fluid Flow 20040303.pdf (301 kb)
    - Minor Losses 20040304.pdf (213 kb)
    - Pipe Flow Problems 20040305.pdf (132 kb)
    - Appendix 20040308.pdf (489 kb)
    8. 1981---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  8. Memories of my Life as a Professional Engineer in the Royal Navy and the Canadian Boiler Industry, by J.M. Dyke, Individual Contributions, 01/01/1981. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Fran Gregory, Ed 20054000.pdf (2139 kb)
  9. Heat and Thermodynamics, Course 125, Nuclear Training Centre, OPG, 01/11/1981. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050100.pdf (6328 kb)
    - Module B.7 Course Procedures 20050101.pdf (302 kb)
    - Module B.6 Basics 20050102.pdf (339 kb)
    - Module B.5 Steam Tables 20050103.pdf (740 kb)
    - Module B.4.2 Entropy, Throttling and Molier Diagram 20050104.pdf (904 kb)
    - Module B.4.1 Turbine With Reheat 20050105.pdf (684 kb)
    - Module B.3.2 Feedheater Operation 20050106.pdf (569 kb)
    - Module B.3.1 Condenser Performance 20050107.pdf (594 kb)
    - Module B.2 Steam Generator 20050108.pdf (477 kb)
    - Module B.1 Reactor 20050109.pdf (826 kb)
    - B.6 Self Evaluation 20050110.pdf (87 kb)
    - B.5 Self Evaluation 20050111.pdf (69 kb)
    - B.4.2 Self Evaluation 20050112.pdf (118 kb)
    - B.4.1 Self Evaluation 20050113.pdf (103 kb)
    - B.3.2 Self Evaluation 20050114.pdf (121 kb)
    - B.3.1 Self Evaluation 20050115.pdf (118 kb)
    - B.2 Self Evaluation 20050116.pdf (137 kb)
    - B.1 Self Evaluation 20050117.pdf (102 kb)
    - Criterion Tests 20050118.pdf (134 kb)
    10. 1984---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  10. Heat and Thermodynamics, Course PI 25, Nuclear Training Centre, OPG, 01/03/1984. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: expansion and contraction, heat transfer, pressure control, Mollier diagrams, efficiency, the CANDU cycle.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050200.pdf (3028 kb)
    - 25-0 Introduction and Course Procedures 20050201.pdf (336 kb)
    - 25-1 Basics 20050202.pdf (471 kb)
    - 25-2 Expansion and Contraction 20050203.pdf (351 kb)
    - 25-3 Heat Transfer Calculations 20050204.pdf (183 kb)
    - 25-4 Pressure Control 20050205.pdf (200 kb)
    - 25-5 Mechanisms of Heat Transfer 20050206.pdf (144 kb)
    - 25-6 Mollier Diagrams and The Turbine Process 20050207.pdf (679 kb)
    - 25-7 Efficiency and The CANDU Cycle 20050208.pdf (298 kb)
    - 25-8 Criterion Tests 20050209.pdf (105 kb)
    - 25-9 Self Evaluation Answer Sheet 20050210.pdf (309 kb)
  11. Fluid Mechanics, Nuclear Training Course 223, December 1984, OPG, 01/12/1984. Doc type: Course.
    Summary: These sections provide definitions and sample calculations for basic concepts such as pressure, density, flowrate, etc. and are NOT the same as the corresponding sections in the January 1977 version of 223.
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fuel Management [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Course Objectives 20040400.pdf (29 kb)
    - Fluid Mechanics 20040401.pdf (599 kb)
    - Answer Section 20040402.pdf (407 kb)
    12. 1988---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  12. Heat and Thermodynamics, Course 225, Nuclear Training Centre, OPG, 01/04/1988. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine with reheat, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20043100.pdf (4667 kb)
    - Index 20043101.pdf (208 kb)
    - Module 1 Basics 20043102.pdf (404 kb)
    - Module 2 Steam Tables 20043103.pdf (636 kb)
    - Module 3 Entropy, Throttling and Mollier Diagrams 20043104.pdf (701 kb)
    - Module 4 Turbine with Reheat 20043105.pdf (611 kb)
    - Module 5 Feedheater Operation 20043106.pdf (511 kb)
    - Module 6 Condenser Performance 20043107.pdf (546 kb)
    - Module 7 Steam Generator 20043108.pdf (382 kb)
    - Module 8 Reactor 20043109.pdf (710 kb)
    13. 1990---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  13. Mechanical Equipment, Course PI 30.1, Nuclear Training Centre, OPG, 01/01/1990. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20043200.pdf (5736 kb)
    - PI 30.10-0 Introduction and Objectives 20043201.pdf (392 kb)
    - 430.10-0 Identification and Coding of Mechanical Equipment 20043202.pdf (251 kb)
    - 430.10-1 Centrifugal Pumps 20043203.pdf (379 kb)
    - 330.10-1 Centrifugal Pumps 20043204.pdf (795 kb)
    - 430.10-2 Positive Displacement Pumps 20043205.pdf (168 kb)
    - 430.10-3 Compressonrs - Dynamic and Positive Displacement 20043206.pdf (270 kb)
    - 430.10-4 Air System 20043207.pdf (82 kb)
    - 430.10-5 Fans 20043208.pdf (57 kb)
    - 430.10-6 Vacuum Pumps 20043209.pdf (185 kb)
    - 230.11-1 Compressors 20043210.pdf (226 kb)
    - 330.11-1 Heat Exchangers 20043211.pdf (218 kb)
    - 430.12-1 Piping and Tubes 20043212.pdf (271 kb)
    - 430.13-1 Valves 20043213.pdf (513 kb)
    - 430.14-1 Lubrification 20043214.pdf (143 kb)
    - 430.14-2 Unit 1 Bearings 20043215.pdf (68 kb)
    - 430.14-2 Unit 2 Lubrification Methods 20043216.pdf (62 kb)
    - 430.14-2 Unit 3 Bearing Design and Installation 20043217.pdf (81 kb)
    - 230.12-1 Lubrification 20043218.pdf (250 kb)
    - 430.15-1 Sealing Devices 20043219.pdf (181 kb)
    - 330.14-1 Axial Mechanical Seals 20043220.pdf (190 kb)
    - 230.13-1 Shaft Couplings 20043221.pdf (204 kb)
    - 230.13-2 Belt Drives 20043222.pdf (247 kb)
    - 230.13-3 Chain Drives 20043223.pdf (115 kb)
    - 230.13-4 Gears and Gearing 20043224.pdf (250 kb)
    - 230.16-1 Gas Turbines 20043225.pdf (289 kb)
  14. Turbine and Auxiliaries, Course PI 34 / TIMS Ref. PI 3004, Nuclear Training Centre, OPG, 01/01/1990. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051000.pdf (11938 kb)
    - PI 34.00-00 Index and Objectives 20051001.pdf (619 kb)
    - 334.00-01 The Steam Turbine 20051002.pdf (676 kb)
    - 234.00-01 Turbine Construction 20051003.pdf (1037 kb)
    - 334.00-03 The Steam System 20051004.pdf (517 kb)
    - 234.00-02 Steam Control to the Turbine 20051005.pdf (514 kb)
    - 334.00-07 The Condenser 20051006.pdf (476 kb)
    - PI 25-06 The Mollier Diagram and the Turbine Processes 20051007.pdf (1214 kb)
    - 334.00-08 Feedwater Heating System -1 20051008.pdf (212 kb)
    - 334.00-09 Feedwater Heating System -2 20051009.pdf (307 kb)
    - 234.00-07 Feedwater Control and Operation 20051010.pdf (586 kb)
    - PI 24.21-01 Secondary Heat Transport System - Impurities 20051011.pdf (230 kb)
    - PI 24.21-02 Chemical Additives and Blowdown 20051012.pdf (274 kb)
    - PI 25-07 Efficiency of the CANDU Turbine Cycle 20051013.pdf (513 kb)
    - 234.00-03 Steam Valve Hydraulic Control 20051014.pdf (255 kb)
    - 234.00-04 Governor Operation 20051015.pdf (516 kb)
    - 234.00-05 Turbine Governors 20051016.pdf (677 kb)
    - 334.00-10 The Lubricating Oil System 20051017.pdf (275 kb)
    - 334.00-11 The Turning Gear 20051018.pdf (113 kb)
    - 234.00-06 Turbine Operational Problems 20051019.pdf (568 kb)
    - 234.00-08 Factors Limiting Startup and Rates of Loading 20051020.pdf (887 kb)
    - 334.00-13 appendix 1 Ontario Hydro Nuclear Turbine Types 20051021.pdf (245 kb)
    15. 1993---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  15. Principes de Science et de Fonctionnement des Réacteurs - Chaleur et Thermodynamique, CNSC, 01/01/1993. Doc type: Course.
    Summary:
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Chaleur et Thermodynamique 20070900.pdf (850 kb)
    16. 1994---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  16. Turbine and Auxiliaries, Nuclear Training Course 234, OPG, 01/07/1994. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 234-00 Introduction to the Course 20042400.pdf (182 kb)
    - Module 234-01 The Steam Turbine 20042401.pdf (760 kb)
    - Module 234-02 The Boiler 20042402.pdf (851 kb)
    - Module 234-03 The Main Steam System 20042403.pdf (1399 kb)
    - Module 234-04 Auxiliary Steam Systems 20042404.pdf (684 kb)
    - Module 234-05 The Condenser and its Auxiliary Systems 20042405.pdf (1091 kb)
    - Module 234-06 The Condensate, the Boiler Feed and Their Auxiliary Systems 20042406.pdf (1736 kb)
    - Module 234-07 The Turbine Governing System 20042407.pdf (724 kb)
    - Module 234-08 The Turbine Supervisory System 20042408.pdf (273 kb)
    - Module 234-09 The Turning Gear 20042409.pdf (305 kb)
    - Module 234-10 The Turbine Lubricating System 20042410.pdf (503 kb)
    - Module 234-11 Startup and Loading 20042411.pdf (1220 kb)
    - Module 234-12 Unloading and Shutdown 20042412.pdf (333 kb)
    - Module 234-13 Special Modes of Operation and Accidents 20042413.pdf (895 kb)
    - Module 234-14 Turbine Operational Problems 20042414.pdf (850 kb)
  17. Mechanical Equipment, Course 23001, OPG, 01/09/1994. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20042800.pdf (1261 kb)
    - Intro and Table of Contents 20042801.pdf (44 kb)
    - Module 1 Centrifugal Pumps and Systems 20042802.pdf (1034 kb)
    - Module 2 Positive Displacement Compressor Operation 20042803.pdf (194 kb)
    18. 1996---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  18. Thermal Study of Nuclear Reactors, Course 2.2, by A. Tapucu, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Design Design Analysis [Audience] Engineer Grad Ugrad
    - Title and Table of Contents 20043801.pdf (96 kb)
    - Chapter 1 - Fundamental Concepts 20043802.pdf (234 kb)
    - Chapter 2 - Single Phase Fluid Equations 20043803.pdf (200 kb)
    - Chapter 3 - Principles of Heat Transfer 20043804.pdf (1061 kb)
    - Chapter 4 - Forced Convection Heat Transfer 20043805.pdf (1624 kb)
    - Chapter 7 - Heat Removal from Nuclear Reactors 20043806.pdf (1557 kb)
    - Appendix 1 - Tensors 20043807.pdf (49 kb)
    - Appendix 2 - Stress in a Fluid 20043808.pdf (256 kb)
    - Appendix 3 - A Short Summary of Orthogonal Functions Used in Chapter 4 20043809.pdf (178 kb)
    - Workbook, Chapter 4 20043810.pdf (2301 kb)
    - Workbook, Chapter 7 20043811.pdf (2043 kb)
  19. Reactor Thermalhydraulics Analysis, Course 2.3, by W.J. Garland, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Fundamentals of thermalhydraulic analysis (heat transfer and fluid mechanics)of the heat transport system.
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] Engineer Grad Ugrad
    - Title and Table of Contents 20043901.pdf (144 kb)
  20. Welding Technology, Course 7.5, by I. Grant, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary: Appreciation of metal joining techniques: wleding, welding processes, weldment quality, symbols on drawings, nondestructive examination, and codes and standards.
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Chapter 01 - Introduction 20053401.pdf (1359 kb)
    - Chapter 02 - Specification – Covered Carbon Steel Electrodes 20053402.pdf (2022 kb)
    - Chapter 03 - Submerged Arc Welding 20053403.pdf (1118 kb)
    - Chapter 04 - Gas Metal Arc Welding 20053404.pdf (949 kb)
    - Chapter 05 - Plasma Welding 20053405.pdf (119 kb)
    - Chapter 06 - Electrical Power Sources 20053406.pdf (551 kb)
    - Chapter 07 - Welding Stainless Steel Tubing 20053407.pdf (473 kb)
    - Chapter 08 - Thermal Efficiency of Arc Welding Processes 20053408.pdf (737 kb)
    - Chapter 09 - Solidification Structures & Properties of Fusion Welds 20053409.pdf (3163 kb)
    - Chapter 10 - Prediction of Welding Distortion 20053410.pdf (618 kb)
    - Chapter 11 - Material & Fabrication Considerations for CANDU Heat Transport Systems 20053411.pdf (1808 kb)
    - Chapter 13 - Fitness for Purpose 20053413.pdf (858 kb)
    - Chapter 14 - Welding Variables Procedure Specs 20053414.pdf (965 kb)
    - Chapter 17 - Calculating Force/Unit Length on Welds 20053417.pdf (773 kb)
    - Chapter 18 - Design for Welding 20053418.pdf (569 kb)
    - Chapter 19 - Design and Construction Methods for Welded Steel Merchant Vessels 20053419.pdf (313 kb)
    - Workbook 01 - Welding Technologyes) 20053420.pdf (240 kb)
    - Workbook 02 - Flux Shielded Welding Processes 20053421.pdf (549 kb)
    - Workbook 03 - Submerged Arc Welding 20053422.pdf (636 kb)
    - Workbook 04 - Gas Metal Arc Welding 20053423.pdf (497 kb)
    - Workbook 05 - Plasma Arc Welding 20053424.pdf (169 kb)
    - Workbook 06 - Welding Power Supplies & Controls 20053425.pdf (262 kb)
    - Workbook 07 - Arc Physics and Weld Pool Behaviour 20053426.pdf (281 kb)
    - Workbook 08 - Heat Flow in Welding 20053427.pdf (262 kb)
    - Workbook 09 - Metallurgical Effects of the Weld Thermal Cycle 20053428.pdf (1172 kb)
    - Workbook 10 - Distortion, Residual Stress & Post-Weld Heat Treatment 20053429.pdf (361 kb)
    - Workbook 11 - Weldability of Structural Steels 20053430.pdf (535 kb)
    - Workbook 12 - Weld Discontinuities 20053431.pdf (923 kb)
    - Workbook 13 - Inspection & Testing 20053432.pdf (327 kb)
    - Workbook 14 - Welding Qualification & Certification 20053433.pdf (480 kb)
    - Workbook 15 - Design for Welding 20053434.pdf (605 kb)
    - Workbook 16 - Weld Symbols on Drawings 20053435.pdf (531 kb)
    - Workbook 17 Static Strength of Welded Joints 20053436.pdf (443 kb)
    - Workbook 18 - Fatigue Failure of Welded Joints 20053437.pdf (557 kb)
    - Workbook 19 - Fracture of Welded Structures 20053438.pdf (539 kb)
  21. Non-Destructive Testing, Course 7.2, by E. Hussein, Chulalongkorn University, 05/12/1996. Doc type: Course.
    Summary: Nondestructive testing including ultrasonics, magnetic flux leakage, eddy current, radiography, acoustic emission, and microwaves.
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Chapter 00 - Table of Contents 20053101.pdf (162 kb)
    - Chapter 01 - Introduction 20053102.pdf (220 kb)
    - Chapter 02 - Ultrasonics 20053103.pdf (670 kb)
    - Chapter 03 - Magnetic Flux Leakage 20053104.pdf (301 kb)
    - Chapter 04 - Eddy Current (pdf 340 kb, 20 pages) 20053105.pdf (369 kb)
    - Chapter 05 - Radiography 20053106.pdf (409 kb)
    - Chapter 06 - Acoustic Emission 20053107.pdf (305 kb)
    - Chapter 07 - Microwaves 20053108.pdf (145 kb)
    22. 1997---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  22. Steam Generators for CANDU, Engineering Memoirs, by J.M. Dyke, Individual Contributions, 01/06/1997. Doc type: Essay.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20054100.pdf (19 kb)
  23. Reactor Mechanical Design, Course 3.6, by R.S. Porter, Chulalongkorn University, 01/10/1997. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 30000 Reactor, Steam Generators and Auxiliaries [Discipline] Mechanical Engineering [Topic] Conceptual Physical Description [Phase] Concept Design [Audience] Engineer Grad Ugrad
    - Section 0 - Title, Table of Contents 20044601.pdf (99 kb)
    - Section 1 - Overview, Reg. Req’ts, Codes & Standards 20044602.pdf (531 kb)
    - Section 2 - Design Philosophy, Rationale, Key Operating Parameters 20044603.pdf (481 kb)
    - Section 3 - Stress Analysis of Reactor Structures 20044604.pdf (253 kb)
    - Section 4 - Excitation Spectra Etc. 20044605.pdf (374 kb)
    - Section 5 - Design of Fuel Channels 20044606.pdf (622 kb)
    - Section 6 - Design of Reactivity Control Units 20044607.pdf (1181 kb)
    - Section 7 - Design of Fuel Handling System 20044608.pdf (1121 kb)
    - Appendix 1 - Design Loads and Load Cases for CANDU 6 20044609.pdf (174 kb)
    - Appendix 2 - Stresses for Design Cases 20044610.pdf (316 kb)
    - Appendix 3 - Finite Element Analysis 20044611.pdf (96 kb)
    - Appendix 4 - Seismic Behaviour of CANDU 6 20044612.pdf (168 kb)
    - Workbook, Chapter 1 - Figures 20044613.pdf (208 kb)
    - Workbook, Chapter 2 - Figures 20044614.pdf (778 kb)
    - Workbook, Chapter 3 - Figures 20044615.pdf (355 kb)
    - Workbook, Chapter 4 - Figures 20044616.pdf (455 kb)
    - Workbook, Chapter 5 - Figures 20044617.pdf (150 kb)
    - Workbook, Chapter 6 - Figures 20044618.pdf (964 kb)
    - Workbook, Chapter 7 - Figures 20044619.pdf (1006 kb)
    24. 1998---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  24. Reactor Thermalhydraulics Analysis, Course 2.3, by W.J. Garland, Chulalongkorn University, 01/02/1998. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] Engineer Grad Ugrad
    - Glossary and Foreword 20043902.pdf (152 kb)
    - Chapter 1 - Course Overview 20043903.pdf (140 kb)
    - Chapter 2 - Basic Equations for Thermalhydraulic Systems Analysis 20043904.pdf (561 kb)
    - Chapter 3 - Nodalization 20043905.pdf (303 kb)
    - Chapter 4 - Equation of State 20043906.pdf (338 kb)
    - Chapter 5 - The Rate Form of the Equation of State 20043907.pdf (512 kb)
    - Chapter 6 - Thermalhydraulic Network Simulation 20043908.pdf (343 kb)
    - Chapter 7 - Empirical Correlations 20043909.pdf (532 kb)
    - Chapter 8 - On Design Tools 20043910.pdf (481 kb)
    - Workbook, Chapter 1 20043911.pdf (151 kb)
    - Workbook Chapter, 2 20043912.pdf (767 kb)
    - Workbook Chapter 3 20043913.pdf (466 kb)
    - Workbook Chapter 4 20043914.pdf (604 kb)
    - Workbook Chapter 5 20043915.pdf (847 kb)
    - Workbook Chapter 6 20043916.pdf (614 kb)
    - Workbook Chapter 7 20043917.pdf (719 kb)
    - Workbook Chapter 8 20043918.pdf (903 kb)
    - Workbook Figures 20043919.pdf (509 kb)
  25. Reactor Thermalhydraulics Analysis, Supplementary, Course 2.3a, by W.J. Garland, Chulalongkorn University, 01/02/1998. Doc type: Course.
    Summary: Supplementary info for thermalhydraulic analysis (heat transfer and fluid mechanics)of the heat transport system.
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] Engineer Grad Ugrad
    - Appendices 1 - 4 1 - Time Derivatives 2 - The Reynolds Transport Theorem 3 - Rearrangement of Independent Variables 4 - Fast Calculation of Light-Water Properties 20044001.pdf (647 kb)
    - Calculation of Water Properties 20044002.pdf (947 kb)
    - THSIM User Manual 20044003.pdf (733 kb)
    - A Pedagogical Look at Fully- and Semi-Implicit Solutions to T-H Eq'ns 20044004.pdf (320 kb)
    - Basic Equations for T-H Systems Analysis 20044005.pdf (590 kb)
    - Miscellaneous Figures and Equations 20044006.pdf (315 kb)
    26. 2002---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  26. Mechanical Equipment Course, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030200.pdf (86 kb)
    - 20030201.pdf (1463 kb)
    - Vibrations 20030202.pdf (1123 kb)
    - Valves 20030203.pdf (2952 kb)
    - Flowsheets 20030204.pdf (1693 kb)
  27. Heat and Thermodynamics Course, CNSC, 01/01/2002. Doc type: Course.
    Summary: This module covers the following areas pertaining to thermodynamics: Introduction, Heat and Thermodynamics - The Basics, Reactor and Heat Transport System Normal Operation, Heat Transport System Component Operation
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Cover Page 20030900.pdf (83 kb)
    - 20030901.pdf (647 kb)
    - Presentation 20030902.pdf (1557 kb)
    28. 2003---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  28. Principes de Science et de Fonctionnement des Réacteurs - Équipement Mécanique, CNSC, 01/01/2003. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] - [Discipline] Mechanical Engineering [Topic] Conceptual [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Équipement Mécanique 20070700.pdf (954 kb)
  29. Fretting in Nuclear Steam Generators - A New Approach, by J.M. Dyke, Individual Contributions, 20/04/2003. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 11th International Conference on Nuclear Engineering, Tokyo, Japan 20054500.pdf (2821 kb)
  30. Fluid Mechanics, CNSC, 24/06/2003. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Presentation 20040602.pdf (610 kb)
    - 20040601.pdf (353 kb)
    - 20070300.pdf (336 kb)
    31. 2004---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  31. The Role of Two-Phase Coolant in Moderating Fretting in Nuclear Steam Generators, by J.M. Dyke, Individual Contributions, 20/04/2004. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 12th International Conference on Nuclear Engineering, Washington, DC 20054201.pdf (1714 kb)
    - 12th International Conference on Nuclear Engineering, Washington, DC 20054202.pdf (1558 kb)
    32. 2006---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  32. Fretting Failures in Early Canadian Nuclear Steam Generators, by J.M. Dyke and W.J. Garland, CANTEACH, 01/03/2006. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060201.pdf (140 kb)
  33. Evolution of CANDU Steam Generators – A Historical View, by J.M. Dyke and W.J. Garland, CANTEACH, 01/04/2006. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060101.pdf (702 kb)
---end of page---